Editing User talk:Speedevil/Ohm

Warning: You are not logged in. Your IP address will be recorded in this page's edit history.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.

Learn more about Contributing to the wiki.

This [http://www.mauve.plus.com/t/ohm.tar.gz tar file for the n900] is a simple script that monitors battery impedance over voltage.

[[image:ohm.gif]]

The top trace is a very old battery, perhaps 500 cycles. 
The middle is a similar battery, but that has been kept in the freezer much of the time, and experienced 20 cycles.
The low trace is one that was purchased from ebay last week.

I intend to develop this into two simple applications - one that presents a best guess of battery remaining lifetime at the instant it's run, without relying on any history.

The second which monitors the battery over one full cycle, possibly able to run in the background normally without any significant extra power demand using the existing loads to monitor the state.

The battery impedance is an important factor. 
It is as important as the capacity, because a battery with relatively good capacity at normal drains may sag to the point of immediate shutdown when loaded heavily.

This is both of use to users to see how likely their battery is to need replacement soon, and to other OS developers that may be wanting to tune behaviour for real battery behaviour over time.

Please note that all contributions to maemo.org wiki may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see maemo.org wiki:Copyrights for details). Do not submit copyrighted work without permission!

Summary:

Cancel | Editing help (opens in new window)

Retrieved from "http://wiki.maemo.org/User_talk:Speedevil/Ohm"

@@ Line 1: / Line 1: @@
-This [http://www.mauve.plus.com/t/ohm.tar.gz tar file for the n900] is a simple script that monitors battery impedance.
+This [http://www.mauve.plus.com/t/ohm.tar.gz tar file for the n900] is a simple script that monitors battery impedance over voltage.
-It has two modes. If called with no argument, it makes 10 measurements taking 20 seconds each, and then outputs an average of those measurements in a human readable form.
-If called with an argument, it outputs every 200s the averaged measurement of impedence and voltage.
 [[image:ohm.gif]]

Personal tools

Navigation

Views

Editing User talk:Speedevil/Ohm