Editing User talk:Westwallpoma

Warning: You are not logged in. Your IP address will be recorded in this page's edit history.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.

Learn more about Contributing to the wiki.

= Clean Install of N900 =

== What's this all about? ==

For the past few months I've had a tendancy to reflash my n900, in a search for the holy grail of reflashes to end all reflashes.  As I stagger my way to the goal, I'll be using this as a scratch pad to note all my findings, cack-handed or otherwise.

= Let's Begin at the Beginning =

== Flash eMMC and firmware 1.3 ==

Download the images from the usual place.  Flash and bring the beast to life.

* Add wifi connection, unless you have an understanding service provider and you are in a 3.5G area (2g here - you'd be crazy to attempt that).
* Open HAM and install rootsh ; you are no longer constrained by the PC brigage and have access to the box of matches and petrol.

== Launch Terminal and install essentials ==

In terminal, enter the following:

root
 apt-get install openssh

Enter your new root password when asked and, assuming your beast is connected to the network, you can now SSH and no longer suffer finger cramp.

== Swap Space ==

The N900 benefits greatly from shifting swap to your sdcard.  Reservations aside from the cost of this (card swapping could be a little unpleasant, increased power usage), this makes a huge difference to high load operations - e.g. disk I/O and will turn your N900 experience from wading through treacle to greased lighting of a well-oiled shovel.  Do it.  Seriously, just do it.

So, this assumes you have done the following:

* Inserted an SD card
* Partitioned some swap space on the card (I did 1GB just for the hell of it but 756MB is the assumed minimum (as per the eMMC card).

Edit the following file:

/etc/event.d/rcS-late

Comment out the lines:

#    sfdisk -l /dev/mmcblk0 | /bin/busybox awk \
 #       -v home_opts="$home_opts" -v fat_opts="$fat_opts" \ 
 #       -f /usr/lib/genfstab.awk > $tmp_fstab

Add the following:

find /dev -maxdepth 1 -name 'mmcblk?' | \
     sfdisk -l | /bin/busybox awk  -v \
     home_opts="$home_opts" -v fat_opts="$fat_opts" \
     -f /usr/lib/genfstab.awk > $tmp_fstab

Essentially, this is the section that builds the fstab entry at boot time.  We're telling it to check all mmc devices (both the eMMC and the SD card) and thus it will add fstab entries for the swap space on both devices.  Later, we simply mark the partition of the swap on the eMMC as a different type and it will be ignored at boot time ; only the eMMC is kept.

Note - you want to retain the swap on your eMMC in the case where you need to remove your SD card ; otherwise your N900 will get upset.

=== Disabling eMMC Swap on boot ===

sfdisk -c /dev/mmcblk0 3 0

=== Enabling eMMC Swap on boot ===

sfdisk -c /dev/mmcblk0 3 82

=== Example /etc/fstab ===

Nokia-N900:~# cat /etc/fstab |grep swap
 /dev/mmcblk1p2 none swap sw 0 0
 Nokia-N900:~#

== I hate FAT32 - and you should too ==

Let's be honest here.  What use is FAT32?  Unless you are lumbered with a Windows machine and *absolutely* have to be able to mount your N900.  Infact - don't do that.  Set up USB networking and transfer files by SSHD (FileZilla or something similar).  It's utter guff.

Change MyDocs to ext3.  While you are at it, change your sdcard to ext3.  Even ext4 if you like!  LVM is pushing the boat, but don't imagine for a minute somebody hasn't tried it.

Note that ext4 has been shown to be a little bit faster ; but I'm still a touch wary, so I'm sticking with ext3.  What we need to do is tell the N900 that we're cool with ext3, via it's mmc-mount suite.  The following talk thread has the details:

http://talk.maemo.org/showthread.php?t=73478

The appropriate bits we want are:

sed -i '1d' /usr/sbin/mmc-mount
 echo -e '#!/bin/sh\ncase "$(sfdisk -c $(echo $1 | cut -c1-12) $(echo $1 | cut -c14))" in\n  43|83)\n    mount -t auto -o $3,noauto,nosuid,noatime,nodiratime "$1" "$2" > /dev/null\n    ;;\n  *)\n    '$(cat /usr/sbin/mmc-mount)'\n    ;;\nesac' > /usr/sbin/mmc-mount
 sed -i 's/$| 1e$/\1 |43|83/' /usr/sbin/osso-mmc-mount.sh
 umount /home/user/MyDocs
 sfdisk -c /dev/mmcblk0 1 43
 mkfs.ext3 -m 0 -L "Nokia N900" /dev/mmcblk0p1
 osso-mmc-mount.sh /dev/mmcblk0p1 /home/user/MyDocs
 chown -R user:users /home/user/MyDocs

== Manually Adding Catalogues to HAM / apt ==

I like Faster Application Manager a lot, but I also like apt and it frustrates me that I can't have access to apt via the usual method.

Adding catalogues to HAM is easy enough though.  The following, saved as a file extras.install will, when loaded through file manager, will launch in HAM and add the repos to your system.  Danger though - here be dragons.  If you don't know what you are doing, you don't know what you are doing.

<pre>
[catalogues]
catalogues = extras-testing ; extras-devel

[extras-testing]
name = maemo Extras Testing catalogue
uri = http://repository.maemo.org/extras-testing
dist = fremantle
components = free non-free

[extras-devel]
name = maemo Extras Development catalogue
uri = http://repository.maemo.org/extras-devel
dist = fremantle
components = free non-free
</pre>

Better option - install FAPMAN and work from the very sexy gui.

Please note that all contributions to maemo.org wiki may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see maemo.org wiki:Copyrights for details). Do not submit copyrighted work without permission!

Summary:

Cancel | Editing help (opens in new window)

Retrieved from "http://wiki.maemo.org/User_talk:Westwallpoma"

Personal tools

Navigation

Views

Editing User talk:Westwallpoma

@@ Line 11: / Line 11: @@
 Download the images from the usual place.  Flash and bring the beast to life.
-* You can be cool and groovy and customise your eMMC to save having to fiddle later.  I like to have my /home ext3 partition to be 16GB so, using a hex editor, I change the size of this partition from 2048 to 16384.
 * Add wifi connection, unless you have an understanding service provider and you are in a 3.5G area (2g here - you'd be crazy to attempt that).