Editing Video encoding

Warning: You are not logged in. Your IP address will be recorded in this page's edit history.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.

Learn more about Contributing to the wiki.

== Introduction ==
The [[Nokia N900|N900]] is a huge step up from the previous Internet Tablets when it comes to playing video files. It is capable of playing full 480p (854x480 pixels) files encoded with a variety of codecs, particuarly H.263 (MPEG4 Part 2/Xvid) and H.264 (MPEG4 Part 10). However, it still has some limitations which you need to be aware of to successfully transcode files to play back on the N900.

The native resolution of previous tablets is 800x480 pixels. Unfortunately, due to hardware limitations, tablets prior to the N900 cannot play videos at that native resolution. Because of this, most videos will need re-encoding for use on the tablets.

== Encoding Software ==
These converters provide fairly simply interfaces to easily convert video to a NIT-friendly format for those who don't want to invest a lot of time or need a lot of customization options.

=== Handbrake ===
{{main|Ripping DVDs with Handbrake}}

[http://www.handbrake.fr Handbrake] is a free and open source multiplatform, multithreaded DVD to MPEG-4 converter, available for Linux, Mac OS X, and Windows. HandBrake is intended primarily to convert VOB files from DVDs.

While Handbrake's 'Universal' and 'iPhone' profile will produce compatible files, it will do so at a lower quality level than the N900 supports, so it is worth using settings more closely tailored to the device's capabilities.

* Handbrake Preset 1: [http://intr.overt.org/misc/Baseline@3.0.plist N900 Optimized HandBrake Preset]. (for Handbrake 0.9.4)<br>
 {{ambox
|type=notice
|text=Note for more recent builds of Handbrake you must disable "Weighted P-frames" or the output will be Main Profile.}}
* Handbrake Preset 2: [http://dl.dropbox.com/u/9311656/N900.plist N900 Fast x264 800x480]

=== tablet-encode ===

[http://mediautils.garage.maemo.org/tablet-encode.html tablet-encode] is a [http://www.mplayerhq.hu/ mencoder] wrapper that offers a number of presets designed for the tablets. Additional presets can be set by the user for greater quality, as the default set is generally optimized for streaming.

=== Media Converter ===

[http://garage.maemo.org/projects/mediaconverter/ MediaConverter] is a Java graphical application with several presets for transcoding video for the [[Nokia N800|N800]] or [[Nokia 770|770]]. Because it is a Java application it will run on many platforms, including Linux, Windows and Mac. You can select a batch of files, a preset encoding method and let it go. You can also have it produce 30 second samples for trying out different settings. Like [[#tablet-encode|tablet-encode]] it uses mencoder. On Windows, it comes with a setup.exe for easy install, and there are distributions for Linux and the Mac on the [http://garage.maemo.org/frs/?group_id=26 download page.]

=== viDrop ===

[http://vidrop.learnfree.eu/ viDrop] is a free and open-source GUI frontend for mencoder originally designed for Rockchip MP4 players but is able to encode to a variety of custom resolutions and bitrates. It works on Linux and Windows, and supports batch processing, profiles and embedding subtitles, among other features.

=== Nokia Internet Tablet Video Converter ===

[http://www.nokia.com/A4688059 Internet Tablet Video Converter] is the official Nokia video conversion application for N800 and N810 devices, available for [http://nds1.nokia.com/NOKIA_COM_1/Microsites/BetaLabs/applications/apps/Internet_Tablet_Video_Converter-0.32.pkg.zip Mac OS X] and [http://nds1.nokia.com/NOKIA_COM_1/Microsites/BetaLabs/applications/apps/Internet_Tablet_Video_Converter-0.32.exe Windows].

The application is designed to be a simple drag-n-drop bulk converter of videos, with minimal configuration option to be simple and fast to use. In addition, it provides a [http://maemo.org/community/wiki/internettabletvideoconverter/ developer API] for hooking into the conversion process so that 3rd party developers can modify what gets converted and how.

The built in video player on the N8x0 devices should be used if videos were converted with this tool, versus mplayer.

Development of the official Nokia Internet Tablet Video Converter has ceased as of 25 March 2008.

=== Avidemux ===

Avidemux is an open source video processing program. It works on almost all known operating systems. The Windows and Linux (qt) versions support preset config files for x264 encoding.

[http://depeje.net/maemo/N900_x264.xml N900 optimized preset for avidemux x264] will encode for the N900. It is essentially a baseline profile for h264.
*In Windows: put this file in Application Data/avidemux/x264/
*In linux: put the file in ~/.avidemux/x264/

Set the video codec: "MPEG-4 AVC", click the "configure" button underneath it and choose the downloaded "Configuration". Using the "Filters" button add a resize filter to your video if needed (800x448 is optimal). Finally set MP4 as "Format".

== General Notes on Codec Usage ==

Two of the most popular codecs are H.263/XVid and H.264. As the Xvid and AVI container formats have become deprecated, the latest version of Handbrake (0.9.4) has dropped support for these formats. DivX have also switched to H.264 since version 7. At a given file size, H.264 will result in better looking video, at a cost in increased encoding time. If you wish to encode in Xvid, you can still download the older Handbrake 0.9.3 or other Xvid encoding-software.

=== Supported Codecs ===

A full list of supported codecs can be found in the [[N900 Media Support]] page.

==== H.264 ====

H.264 video (MPEG4 Part 10) is supported natively by the N900. The format has a variety of profiles; the N900 supports the Baseline 3.0 profile, which is what Handbrake will encode at by default.

More information on H.264 can be found on [[:wikipedia:H.264/MPEG-4_AVC|Wikipedia]]

=== Anamorphic Video ===

The native Media Player in the N900 does not support Anamorphic Video. DVDs are stored at a resolution of 720x480 (NTSC) or 720x576 (PAL) but displayed at either 640x480 (for 4:3 video) or 854x480 (for 16:9 video). This means that video frames are stored 'anamorphically' - meaning that they are displayed at a different size from what they are stored at. Particularly, this means that the video frames have non-square pixels. Unfortunately, the media player doesn't understand this and will display the video at 720x480, resulting in squashed or stretched video. So, you must resize the video in Handbrake to ensure pixels are square, or you can disable Anamorphic encoding entirely.

=== Streaming Video ===

The media player supports streaming video from http URLs, but you must be aware of two things. First, in Handbrake you must ensure the 'Web Optimized' checkbox is ticked for mp4 files. This is already in my preset. Without it, you cannot stream the files. Secondly, the buffering algorithm is not designed to handle high bitrate files that would play normally from local storage. This means that you will see a lot of pausing and buffering messages. It seems that the highest bitrate it will stream happily is about 1 MBit/s including audio. The preset is optimized for local storage - you can tweak it to produce smaller files if you need to stream.

=== Resolution ===

As mentioned above, you will have to resize all DVDs you try to transcode, and maybe other files too. So it's good to know what target resolutions to use.

==== 4:3 DVDs (Aspect Ratio 1.33) ====

4:3 DVD video is easy to handle. Just resize to 640x480.

==== 16:9 DVDs (Aspect Ratio 1.78) ====

For 16:9 DVDs, it is harder. 854x480 is a valid choice, but the N900 will have to scale it down to display, so a better choice is 800x448 - which exactly fits on the N900 display. This means you are throwing away vertical detail and bloating the file horizontally but it's the least worst choice without anamorphic support.  If you want smaller file sizes, you can choose to encode your video at other 16:9 compatible resolutions such as 720x416, 704x400 or 640x368 and the N900 will scale the display back up to 800x448, although there may be some loss of image quality.  Please note, these resolutions are not perfect 1.78 aspect ratio, but are the nearest to whilst maintaining widths and heights that are divisible by 16, which improves encoding efficiency.

==== Letter box DVDs ====

Occasionally, you will see a DVD with widescreen content inside a 4:3 frame - so the black borders are in the actual video. To make the video display nicely, you will need to use handbrake's crop feature to cut out the black bars. This is a pretty involved process because you are cropping the original anamorphic frame but need to store it with square pixels. So you might crop to 720x360 (16:9 inside 4:3) and then store it as 720x408 to get square pixels. For even wider movie content, the vertical resolution will be even lower (272 and 306 respectively for 2.35:1 content)

==== SD sources ====

SD sources will generally have square pixels and 480p or less. You can keep the source resolution unchanged or if you have a true 854x480 source, or shrink it to 800x448 as with DVDs.

==== HD sources ====

If you are scaling down an HD source, you will want to target 800x448 as well. If the file is a movie that is wider than 16:9, the vertical resolution will be lower than 448 pixels - just set the width to 800 and maintain the aspect ratio. Essentially all HD content has square pixels.

=== N900 Notes ===

The N900 supports a native resolution of 854x480 and does not support 1280x720. The actual limit is unknown, but using a resolution larger than the native resolution is not recommended as the resolution would be larger than the screen and therefore inefficient.

=== N770, N800/810 Notes ===

To encode video that will scale nicely to the screen aspect ratio, you can use either 240x144 (slightly larger than QCIF), 352x208 (slightly smaller than CIF) or 400x240 (N800/N810 only). Of course if your source video is in a 4:3 aspect ratio, then you should stick with CIF (352x288) or QCIF (176x144). The video player will letterbox or pillar box as needed.

The demo video that comes with the N800 is encoded at 600 kbps, with a frame rate of 30 fps and a resolution of 400x240 pixels. To calculate the pixels per second, the equation is 400x240x30 = 2.88 Megapixels/second.

[http://talk.maemo.org/showthread.php?p=287229#post287229 Some recent tests] have found that in some cases, higher resolutions can produce good results on the N800/N810. Specifically, 576x352 @ 24/25 fps or 480x288 @ 30 fps have been reported to work well if the bitrate is kept around 600 kbps.

For the Nokia 770, 1.52 Megapixels/second is achievable, but again, this depends on the complexity of the action.

The standard media player has some limitations:

* Horizontal and vertical dimensions must be multiples of 16.
* Video data rate and resolution is limited to about 800 kbps and 400x240 pixels (352x288 on the 770).
* Audio must be at 44.1 kHz or lower (performance drops dramatically with 48 kHz audio).
* It does not support external subtitles, so they must be hardcoded.
* DivXs need a FOURCC of "DIVX" rather than "DX50".

== Audio Encoding ==

=== Standard Audio Codecs ===

==== AAC ====

AAC is supported natively by the Media Player in the N900. AAC is better than MP3 at the same bitrate, so you should generally choose AAC unless you require backwards-compatability to older devices.

The N900 will playback without difficulty a 48 kHz, 160 kbit/sec Dolby Prologic II stream in AAC format (encoded from an AC3 5.1 source).

==== MP3 ====

MP3 is supported natively by the Media Player in the N900.

=== Extra Audio Codecs ===

It is possible to add extra audio codec support to the N900 by installing the   [http://maemo.org/downloads/product/Maemo5/decoders-support/ Decoders Support] package from Maemo Extras.

==== AC3 ====

The Decoders Support package adds AC3 audio support. AC3 audio is interesting because most DVD audio tracks are encoded in this format. This would allow you to copy the audio track without transcoding it. However, this is not necessarily ideal. Firstly, AC3 decoding will be done by the CPU, while AAC decoding is offloaded to a DSP which reduces power consumption. Secondly, you are not going to be able to take advantage of surround sound - meaning that storing a full 5.1 audio track wastes space.

=== Older devices ===

As for the audio subsystem, MP3 at 128 kbps works well with older tablets like the N700 and N800/810. You can reduce the bitrate if you want to limit the file size and if you plan to play the file with the internal speaker only.

== Container Formats ==

The "container" is what holds the video and audio together and instructs the playing software what to do with them. Different types of audio and video formats exist in one container package, which you will see as for example ".avi" for the Audio-Video Interleave container.

=== Supported Container Formats ===

==== MP4 ====

Supported out of the box in the N900 and is the preference for video container formats. MP4 files can be played natively using the built-in Media Player. MP4 also supports chapters which are encoded by default in Handbrake.

While Media Player does not support seeking through an MP4 video file by chapter, it has no problem playing MP4s that contain them. It is better therefore to leave them in, as Chapter support may be included in future updates to Media Player.

==== AVI ====

AVI is supported out of the box on the N900; however, MP4 is superior in many ways and should be your preference unless you require backwards compatability. AVI is deprecated as a container and support has been dropped by Handbrake since version 0.9.4. DivX also switched to using the MKV container since 2008. AVI files can be played natively using the built-in Media Player.

==== MKV ====

MKV is a superior format to both AVI and MP4, but is not fully supported as yet by the native Media Player in the N900. It supports multiple audio tracks, multiple subtitle tracks along with chapter support and more features.

Support can be added by [http://maemo.org/downloads/product/Maemo5/decoders-support/ downloading the Decoders Support package] from Maemo Extras. However, MKV files will only play with mplayer which is still in development for Maemo 5/ N900. As such, it is not recommended at this time and there are significant performance costs when not using the built-in Media Player.

== Subtitles ==

Subtitle support is one area where options are severely limited - the tablet's media player does not handle them. So, the only choice available is 'burned' subtitles - where Handbrake renders them into the video stream.

== Media Players ==

=== Media Player ===

Media Player is the native N900 media player and has the primary advantage of being integrated into the UI and have DSP hardware acceleration. If you choose one of the alternatives, you lose this advantage and have to deal with increased battery usage and other problems. It is preferential for your video file to be playable on the native Media Player.

=== mplayer ===

mplayer is currently in development for the N900. It supports MKV playback and subtitles, but must be used from either the command-line or using a front-end like SiB or KMPlayer. However, despite its support for MKV, there is a significant increase in CPU usage due to the lack of hardware acceleration compared to the native player at this time.

== Manual conversion instructions ==

{{main|Manual video encoding}}
These tools offer manual conversion for those who need lots of customization options or just like getting down to the nitty-gritty.

== Further reading ==
* [http://www.aneesoft.com/tutorials/video-converter-tutorials.html Convert videos for Nokia Phones]
* [http://www.ifunia.com/how-tos/handbrake-presets-for-ipad-iphone4.html Handbrake Presets for iPhone 4 and iPad]
* [http://www.ipodvideosconverter.com/ Ipod Video Converter]
* [http://www.icoolsoft.com/ipad-video-converter/ Ipad Video Converter]
* [[Manual video encoding]]

[[Category:Media]]
[[Category:Wiki page of the day]]
[[Category:Power users]]

Please note that all contributions to maemo.org wiki may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see maemo.org wiki:Copyrights for details). Do not submit copyrighted work without permission!

Summary:

Cancel | Editing help (opens in new window)

Templates used on this page:

Template:Ambox (view source) (semi-protected)
Template:Main (view source) (protected)

Retrieved from "http://wiki.maemo.org/Video_encoding"

@@ Line 19: / Line 19: @@
 |text=Note for more recent builds of Handbrake you must disable "Weighted P-frames" or the output will be Main Profile.}}
 * Handbrake Preset 2: [http://dl.dropbox.com/u/9311656/N900.plist N900 Fast x264 800x480]
-=== Arista ===
-[http://www.transcoder.org/ Arista] is a video conveter supporting out-of-the-box N900. It works basing on presets, among which are presets for N900. No need to download anything more.
-It's only known to support Linux. But, because it is written in PyGTK, it may be set up to run on Windows & MacOSX as well.
 === tablet-encode ===

Personal tools

Navigation

Views

Editing Video encoding