N9QTweak
For anything not covered here please visit the official N9QTweak thread
Introduction
N9QTweak by Schturman is a collection of tweaks and settings for your N9/50 device. With this app users no longer need to worry about applying various tweaks manually with added complications.
Installation
1) Download the .deb file from the TMO thread
2) Transfer it to your phone and tap on it to install
3) A new icon will be created on the Homescreen at the end of successful installation. Clicking it will run the application.
Opening N9QTweak for the first time ever
Version v9.1.1 onwards follow these instructions:
1) Ensure you are connected to the Internet
2) A download menu for the PDF instructions file is displayed following which your chosen language's (English/Russian) PDF file is downloaded and saved to /home/user/MyDocs/Documents/N9_QuickTweak_LANGUAGE_VERSION.pdf
3) You are now set to use N9QTweak!
4) If you are unable to be connected to the Internet, the system will save a PDF file to /home/user/MyDocs/Documents/ with links for you to manually download the PDF instructions file.
NOTE: If you are unable to download the PDF file(s) even if connected to the Internet, make sure you have enabled background connections. Also try using a different Internet Connection. Alternatively, you may use the links in the other PDF file in /home/user/MyDocs/Documents/ to manually download the full PDF instructions file. Once done, copy the full PDF instructions file to /home/user/MyDocs/Documents and delete the links PDF file. Opening N9QTweak now will not give you the PDF download menu anymore.
The following only applies if you keep getting bash not found error:
1) Use MeeCatalog from the Store to add from the well-known catalogs list, Harmattan SDK repository
2) In terminal as root type the following:
apt-get update
apt-get install bash
3) Now try opening the app again.
Important Notes Before Running Any Tweaks
1) Run "Create Backup" [Tweak K] on first use of the app. This procedure does NOT need to be repeated when you wish to update to a newer version of the app.
2) Updating to a new version DOES NOT require you to run "Restore" from the app to undo any previous tweaks/mods.
3) Installation of new version is the same; just double click the new .deb file from your phone
4) In the event of not having a backup and requiring a clean backup download a CLEAN BACKUP
5) It is recommended to start with Tweak A first as Tweak A has some similar files to other tweaks which can result in other tweaks being restored too in the event Tweak A is restored if Tweak A was not installed first
6) Multiple tweaks can be appplied at once with one space between the letters before pressing ENTER [e.g. A B D E ... then pressing ENTER]
7) Some tweaks may need a refresh or reboot. You can apply them in the end of your session or in the end of the letters you want to apply at once. A single refresh or reboot will apply all the tweaks that require a refresh or reboot.
Tweaks Menu
Tweak A: Speed Up Transitions MODs
This Tweak REQUIRES a REFRESH!
1. Full Speed Up Transition MOD: includes Landscape MOD for Home & Lockscreen.
2. Speed Up Transitions with Only Homescreen Landscape MOD
3. Speed Up Transitions with Only Lockscreen Landscape MOD
4. Only Speed Up Transitions - NO Landscape MOD
5. Restore to Default: This will restore your Backup files
Tweak B: Landscape MODs
This Tweak REQUIRES a REFRESH!
1. Full Landscape MOD (Home & Lockscreen)
2. Only Homescreen Landscape MOD
3. Only Lockscreen Landscape MOD
4. FOUR Sides Rotation for Meegotouch apps
5. THREE Sides Rotation for Meegotouch apps
6. Hide Statusbar for Meegotouch apps
7. Vesuri MOD for Stock Apps Rotation
This option is not recommended for novice users. Kindly read the corresponding thread first before attempting this option!
This option typically applies only the two .deb files you may find in Vesuri's thread. However, you may choose to apply the patch manually by doing the following as ROOT in terminal:
patch -p0 -i /opt/N9QTweak/Vesuri/libmeegotouch-unlockorientation.patch
You may remove the patch by doing as ROOT in terminal:
patch -p0 -R < /opt/N9QTweak/Vesuri/libmeegotouch-unlockorientation.patch
NOTE before applying:
This MOD can't be restored to default using option 9 and it is NOT included in Tweak Z!
8. Screen Rotation Sensitivity
9. Restore ALL to Default [Except Vesuri MOD]
Tweak C: Changelog
Running this tweak will display the changelog for the latest version for the user!
Tweak D: Virtual Keyboard (VKB) MODs
1. Install/Uninstall Additional Virtual Keyboards: Choose from English, Hebrew, French, Turkish, Italian, Slovak, Russian & Spanish alpha-numeric vkb. You can Choose what to install/uninstall. The vkb's will stay normal in Landscape Mode.
2. Enlarge Landscape Virtual Keyboard: Enlarges the Landscape VKB. Gives an option to activate stretched spacebar for only UK/US English without having to enlarge the VKB. A REBOOT will be required for it to be applied.
3. Enable/ Disable extra settings for Swype: Adds extra settings for Swype under Time & Language in Settings
4. Enable/Disable terminal function keys: this will add key F1-F12 to terminal VKB
5. Disable/Restore swype info bubbles: Bubbles that appear in Swype VKB
6. Enable/Disable Better Haptic Feedback: Improve your experience with the VKB
7. Enable/Disable Harmoji: Emoji Keyboards for the n9.
8. Enable/Disable dannejanne keyboard theme: Change the look of the keyboard slightly
Tweak E: Games MODs
1. Add Save option to Samurai II
2. Add Save option to Gears
3. Add Save option to Konas Crate
4. Add Save option to Roboto
5. Disable NFC in Angry Birds Magic
6. Add Mighty Eagle to Angry Birds Classic
Tweak E-7 APKENV project: Android games
This option allows you to install files from thp's apkenv project as well as creates desktop launchers for games that work currently!
Before running any option in this tweak you need the following files from thp's project page:
apkenv harmattan libc.so liblog.so libm.so libstdc++.so libz.so
Place the above files in /home/user/MyDocs/Apkenv/Packages/
Tweak E-7-1: INSTALL Apkenv Run this option to activate apkenv only after files mentioned above are placed correctly in the directory as mentioned
Tweak E-7-2: INSTALL Android games Currently, Angry Birds Space, Angry Birds Seasons, Angry Birds Rio, Angry Birds (2.3.0) & Fruit Ninja work using this option. Place the .apk files in /home/user/MyDocs/Apkenv and rename them to as follows: a. Angry Birds Space -> abspace.apk b. Angry Birds Seasons -> abseasons.apk c. Angry Birds Rio -> abrio.apk d. Angry Birds (2.3.0) -> absurf.apk e. Fruit Ninja -> fruitninja.apk Only after copying the .apk files and renaming as above apply this option which will create a desktop icon on your homescreen for you to run the games! If you are unable to run the games even after doing the above, it means the .apk file is not compatible and you require another .apk file. You may simply replace the .apk file in the directory without having to run Tweak E-7-2 again! Do also ensure, Tweak E-7-1 is run first correctly for Tweak E-7-2 to work!
Tweak E-7-3: UNINSTALL Android games This will remove the desktop launchers only! You may choose multiple games to be removed by separating their numbers by a space i.e. 1 2 3 etc
Tweak E-7-4: UNINSTALL Apkenv + games This option will remove the desktop launchers as well as the whole apkenv project from your device! If you wish to install it again, simply run Tweak E-7-1 with proper instructions as above!
Tweak E-7-5: Game saver This option will save your game progress however, you need to run this option before starting another game! For example, you have finished playing Angry Birds Rio; run this tweak after closing Angry Birds Rio and only then start another game!
Tweak F: Lock screen & Low Power Screen (LPS) MODs
Read the Explanation after the options for better understanding on how to change the files
1. Apply BIGGER Date/Bold Clock and Oplogo with standard size (12x12)
For Oplogo: * Create a picture named "oplogo.png" with dimensions of 120x120px * Copy the image to /home/user/MyDocs/Pictures * Apply Tweak F-1 and REFRESH for application
2. Apply CUSTOM Clock/Date Color and Oplogo with CUSTOM size
For Oplogo: * Create a picture named "oplogo.png" with dimensions of your choice * Copy the image to /home/user/MyDocs/Pictures * Apply Tweak F-2 and it will ask for the dimensions of your logo. For example, a 140x160px logo key in 14 as the first number and 16 as the second number. * A REFRESH will apply the changes
3. Apply CUSTOM Clock/Date on Lock & Lowpower Screens
4. Apply Green Icon for Full Charged Battery
5. Apply Other Colored Icons to LPS & Statusbard
6. Transfer your custom Icons for Tweak F-5
* Create new icons and place them in /home/user/MyDocs/.newicons * Apply Tweak F-6 (this will override icons in tweak F-5) * Now Apply Tweak F-5 * A REBOOT will apply the changes
7. Activate Fullscreen Image for Lockscreen
* Create 1 or 5 pictures named mywall1.png, mwall2.png, mywall3.png, mywall4.png, mywall5.png with dimensions of 854x854px * Copy the images to /home/user/MyDocs/.wallpapers * Go to Settings->Wallpaper and choose your wallpaper before clicking Done * Apply Tweak F-7 and choose the number of picture(s) that you applied from Settings. * Changes appear immediately without a REBOOT!
8. Change Outgoing & Incoming Call Icons
9. Restore ALL to Default
Tweak G: Changing GPS Provider / Adding Traffic to the Drive App
1. Changing GPS provider gives you the option to choose between Nokia & Google.
SuplForced can be changed from "false" to "true" and vice-versa with this tweak too.
2. Traffic in Drive App allows you to Enable/Disable Traffic + Day/Night/Automatic Mode for Map Colours + Time to Destination in Drive App + Add Mute Button to Speed Warning Menu.
3. Change Drive to WAZE: Change Drive in In Car Home Screen to WAZE.
Tweak H: Enable ROOT-SSH Access & Root Filebox
Allows you to acitvate SSH access for "ROOT" & "USER" users.
Auto-restart SSH is added too.
You can use this tweak to change "ROOT" & "USER" users' passwords.
Lastly, this tweak gives you the option to apply or remove root access to the Filebox app
Tweak I: Add additional IM's (Extraplugins from Store)
This tweak adds additional IM providers [including but not limited to ICQ/MSN/Yahoo/AOL/Jabber/VK] to the N9's Accounts app with system integration.
A REBOOT is required to apply this tweak!
If you have applied this tweak from versions prior to N9QTweak v8.0 you need to do the following in terminal as ROOT:
apt-get remove im-providers-additional telepathy-haze libpurple0
OR:
From Settings -> Applications -> Manage Applications -> Remove im-providers-additional , telepathy-haze & libpurple0
If you installed a similar tweak from other sources, the following packages need to be REMOVED BEFORE applying this tweak:
aolserviceprovider icqserviceprovider jabberserviceprovider msnserviceprovider odnoklassnikiserviceprovider qipserviceprovider vkserviceprovider yahooserviceprovider im-providers-additional telepathy-haze libpurple0 Accmanok
You may also use this Tweak to Change/Restore IM Connection Ports!
Tweak J: Remove/Restore Unnecessary Icons
This tweak allows you to remove/restore but NOT uninstall. Apps that are covered in this tweak are:
- All of the Below
- User Guide
- Ovi Music
- Search
- Camera
- Calculator
- Track & Protect
- Browser
- Skype
- YouTube
- SDK Connectivity
- Operator
You can remove more than one app by entering multiple numbers with a space between them [E.g. 2 4 6 then ENTER].
Tweak L: Clean Backup
This tweak downloads a clean backup for the user and saves it as /home/user/MyDocs/.N9QTweakBackup/
Run this tweak when you suspect your backup has an issue or when you forgot to create a backup first and need to restore anything.
Tweak M: Browser MODs
Opera tablet: Add Opera tablet UI to your Opera Mobile app
Change User Agent of the Stock Browser [aka Web]: This tweak requires INCEPTION to be pre-installed. Available options for the User Agent are as follows:
- iOS
- Android
- Revert to Default
Tweak N: Restore your favorite Ringtones
Put your desired ringtones in /home/user/MyDocs/.myringtones
Now apply tweak N after which all these ringtones will be copied to /usr/share/sounds/ring-tones
After this you can change your ringtones in Settings -> Sounds and Vibration -> Ringtone
Tweak O: Catch OVI Store Applications
Store a .deb file of your apps for easy installation in the future [e.g. after flashing / clearing device].
Run this tweak -> Open Ovi Store and Click Download on the App which you would like to store
Once the app is caught, a message will be displayed in N9QTweak to show a successful interception. Your downloaded file is stored in your "Downloads" folder e.g. /home/user/MyDocs/Downloads/
This tweak comes with a handy option to add an icon to the homescreen for easy catching.
This tweak works on MeeCatalog and any other sources that install apps on the N9!
Tweak P: Add/Remove folder to/from Tracker
The advantage of this tweak is to allow you to add or remove folders residing in MyDocs from Tracker IgnoredDirectory [e.g. you have some explicit material not wanting to appear in gallery or videos but to be opened only by Filebox just put it into a folder and add it to Tracker IgnoredDirectory].
You can backup your settings too so the new tracker settings will be restored if/when you require.
Tweak Q: Enlarge Caller ID Avatar
Enlarge or Restore to Default the Caller ID Avatar.
A Bigger Avatar with square corners can be applied too.
This Tweak requires a REBOOT.
Tweak R: Conversation MOD
1. Change Standard Emoticons: A New set of emoticons for your viewing pleasure. You also can enlarge original/custom emoticons (ideal size is 27). The enlargement of emoticons requires Inception to be installed prior to using this tweak.
2. Enlarge/Restore Conversation Font Size: Choose your prefer size. DON'T use bigger then 32.
3. BLACK Conversations theme with Square Bubbles: Option to install a minimalistic black theme for Conversation/Messaging app.
4. BLACK Conversations them with Rounded Bubbles: Option to install a minimalistic black theme for Conversation/Messaging app.
5. Restore ALL to Default
Tweak S: Boost the Playback Volume
Increase the Playback Volume from 66% [default] to 100%.
Warning: This can potentially damage your hardware. The author will not be held responsible for any damage done. Use with caution.
This tweak will change PreDriv setting in "alsamixer" with this tweak.
Tweak T: System UI MODs
Two versions of System UI MODs are created by MohammadAG and Coderus.
Only ONE can be used at a time. NO Mixing should be done!!!
1. Unrestricted MT-Toggles: Open Mode or Inception along with N9 PR1.3 is compulsory
Two options are available under this main option:
1. Coderus toggles: You CAN'T use MohammadAG repo for future updates.
2. MohammadAG toggles: You CAN use MohammadAG repo for future updates.
Features of BOTH the above toggles:
- Latest Version of Unrestricted System-ui [From MAG]
- Music Controls by MAG: Auto-Hidden; ONLY seen when you play music
- Status Updater by MAG
- Battery Percentage by MAG
- Availability or PresenceX by Coderus
- Hacky-Brightness Applet by Coderus
Toggles in Coderus' Version:
- Bluetooth
- PSM
- Flightmode
- Flashlight
- Cellular-toggle
Toggles in MAG's version:
- Bluetooth
- PSM
- Flightmode
- Flashlight
- Orientation Lock
There is a possibility of getting a SAFE MODE icon on your status menu after a reboot. DON'T PANIC!!!
Just click the icon and choose "YES" which will do a refresh of your status bar and everything will work fine again.
The above non-fatal issue is caused by Status Updater. You might want to Uninstall it to prevent the non-fatal issue.
Important Notes w.r.t. MT-Toggles & System UI Extensions
Installation of Unrestricted System-UI and/or MT-Toggles is NOT COMPATIBLE with System UI Extensions.
To use either while having the other installed, just uninstall the other using the options available.
Sub-Options
1. Password changer for HackyBrightness applet:
At times after a reboot, HackyBrightness will not work with only Standard Brightness applet working. Fix this by running this tweak and re-inserting your "ROOT" password.
2. Rearrange status menu plugins:
Installation of System UI MODs will mess up the arrangement of all applets.
This option arranges all your INSTALLED APPLETS ONLY.
Names of applets must follow as those in the list!
If you require to re-arrange ALL APPLETS do it manuall in this file: /etc/status-menu-items-order.conf
3. Logout quick status updater:
When Quick Status Updater stops working, use this tweak to logout and re-login.
2. Status Menu Extensions
This tweak is still in BETA so tread with caution!
Pre-requisites for using System UI Extensions:
- Removal of Unrestricted System-UI & MT-Toggles, if present
This tweak will add a new entry in Settings -> Applications -> Status Menu Extensions
You can Deactivate any toggle by LONG PRESSING.
Re-arrange toggles by using a SHORT PRESS.
3. CODeRUS Unrestricted System UI
A new variation of system-ui similar to unrestricted system-ui but inclusive of all applets from CODeRUS and Status Updater + Music Controls from MAG
Pre-requisites for this tweak:
- INCEPTION or OPEN MODE REQUIRED!
- Removal of all previous versions of System UI from CODeRUS
Tweak T-3-1
Continue to install CODeRUS Unrestricted System-UI
Option 0: INSTALL CODeRUS System UI THIS MUST BE INSTALLED BEFORE CONTINUING!!! By Default, battery percentage will be placed into the status bar after installing of the system-ui. If you want only the % without the battery icon install Battery percentage from Option 6
Option 1: ALL Applets This option will install Tools, Widgets, Brightness bar, Availability Icons, Music Controls, Quick Status Updater and LED Event Notifier. If you are using Open Mode method, there is a probability of N9QTweak being forced closed by the system after installation of a few of the applets. Hence, in this case continue installation of the remaining applets manually or as recommended install the applets individually from Options 2-10 instead of choosing this Option.
Option 2: Tools System Tools are installed. These tools/toggles consist of: Bluetooth, NFC, Cellular, WiFi, Background Connections, Flight Mode
Option 3: Widgets System Widgets are installed. These widgets/toggles include: 2G/3G/Dual Toggle, Orientation, Brightness, USB, PowerSave Mode, Transfers, Flashlight, Blanking, Presence, Reboot, Alarms, ALS. You can enable or disable these widgets using [GConfik]. Navigate to /desktop/meego/status_menu/widgets/ to do so. Remember to set/unset each applet for changes to apply.
Option 4: Brightness This adds a brightness bar on the status-menu. The brightness bar is a two type bar whereby the regular brightness can be adjusted or long-pressing it will switch it to "hacky" allowing you to adjust the brightness customly. You can choose your own colour for the bar by using [GConfik]. Navigate to /desktop/meego/status_menu/brightness_slider and choose your own RGB values. For a full list of colours and their RGB values refer to [1] You can also use Tweak T-3-3 to do the colour change.
Option 5: Availability The Availability option in the status menu will be replaced by this option consisting of all your Social services appearing as icons for easy switching between online/offline by tapping the toggle.
Option 6: Battery Percentage Remove your battery icon and keep only the percentage on the status bar with this option
Option 7: Notifications Get notifications on your status menu directly. A "Close" button is added for clearing all notifications. The status menu will be scrollable in the event of the notifications extending out of the screen.
Option 8: Music Control Add Music Controls to the status menu which appear only if music is being played and hide otherwise.
Option 9: Quick-Status-Updater Add Facebook and Twitter Status buttons on the status menu for quick updating of status.
Option 10: LED Event Notifier Convert the LED light on the N9 to blink in the event of any notifications like IMs, Messages, Missed Calls, Emails, Wazapp etc. You can control which notification(s) you want from: Settings-> Notifications -> Notifications -> Led notifications -> Settings
Tweak T-3-2: Menu Changer
Use This Tweak only AFTER installation of Tweak T-3-1 to select the type of your status menu.
Option 1: Standard Menu The whole status menu is static with NO notifications and NO close button. Re-arrange your applets after choosing this option by editing, using a text editor like nano, /home/user/.status-menu/items-order.conf For exact names of applets refer to /usr/share/meegotouch/applicationextensions
Option 2: Menu With Notifications & Close Button Top of the status menu will remain static while the bottom becomes dynamic. Re-arrange your applets after choosing this option by editing, using a text editor like nano, /home/user/.status-menu/top-order.conf and /home/user/.status-menu/pannable-order.conf For exact names of applets refer to /usr/share/meegotouch/applicationextensions
NOTE: Use This Tweak only AFTER installation of Tweak T-3-1
Tweak T-3-3: Change Brightness Colour
Use this option to modify the RGB values of the colour of the brightness bar to achieve your own custom colour. For a full list of colours and their RGB values refer to [2].
Tweak T-3-4: Change Hacky-Brightness Colour
Use this option to modify the RGB values of the colour of the hacky-brightness bar to achieve your own custom colour. For a full list of colours and their RGB values refer to [3].
Tweak T-3-5: Move Notifications Up/Down
Self-explanatory!
Tweak T-3-6: Double tap on Low-Power Screen
Option 1: Double Tap Cancelled Disable Double-Tapping
Option 2: Double Tap to see Lockscreen [DEFAULT] This is the system's default behaviour
Option 3: Double Tap to UNLOCK Phone Jump straight to your phone without having to unlock the lockscreen!
NOTE: Use This Tweak only AFTER installation of Tweak T-3-1
Tweak T-3-7: Operator Name
Hide/Restore Operator Name
Tweak T-3-8: Logout from Quick Status Updater
Self-Explanatory!
Minor issues with Tweak T-3
Bug:
Alarm works with delay or when it sounds the controls don't appear and auto-snooze after 30seconds of alarm sounding
Work-around:
Set a test alarm with your lockscreen unlocked. Once it rings, it will auto-snooze after ringing for 30seconds. Now set a new alarm for the time you need it to sound. This work-around must be repeated at EVERY reboot!
Bug:
Music player opens with a delay of around 25 seconds. There is no current work-around for this bug
Bug:
There is long delay for the Authroization window to appear using the Status Updater. There is no current work-around for this bug
Tweak U: Zoom in Video Recording & Silent Sounds
Add/remove zoom option in Video Recording mode.
Add/restore silent sounds to Photo & Video Camera.
This Tweak Requires a REBOOT.
Tweak W: Homescreen Setting
Tweak W 1-4: Change/Restore your desktop backgrounds
Note: Tweak W is not compatible with Home Screen Settings App!!!
Tweak W->1: Apply SAME Backgrounds to all 3 screens in Portrait & Landscape
Method for using 2 images; (one for landscape and one for portrait):
- Create 2 pictures named "Pdeskbg1.png" of 480x854px dimensions & "Ldeskbg1.png" of 854x480px dimensions
[Pdeskbg1.png would represent the portrait image while Ldeskbg1.png would represent the landscape image]
- Put the above images in /home/user/MyDocs/Pictures/.backgrounds/
- In N9QTweak choose option W->1 [now hit Enter]
- A REBOOT is required for changes to take effect
- You can also use this tweak only in portrait mode by placing just Pdeskbg1.png in /home/user/MyDocs/Pictures/.backgrounds/
Tweak W->2: Apply DIFFERENT backgrounds to all 3 screens in Portrait and Landscape
Method to achieve the above:
- Create 6 images as follows:
Pdeskbg1.png with 480x854px dimensions Pdeskbg2.png with 480x854px dimensions Pdeskbg3.png with 480x854px dimensions Ldeskbg1.png with 854x480px dimensions Ldeskbg2.png with 854x480px dimensions Ldeskbg3.png with 854x480px dimensions
- Put the above images in /home/user/MyDocs/Pictures/.backgrounds/
- In N9QTweak choose option W->2 [now hit Enter]
- A REBOOT is required for changes to take effect
- You can also use this tweak only in portrait mode by placing just Pdeskbg1.png, Pdeskbg2.png and Pdeskbg3.png in /home/user/MyDocs/Pictures/.backgrounds
Tweaks W->3 & W->4 are simply the repeat of W->1 & W->2 without Long & Transparent Notification Bar
Tweak W 5: Only Long & Transparent Notification Bar
This option changes the notification bar on your lockscreen to a transparent one!
Tweak W 6: Folder Pop-up Window MODs
3 options:
1) Transparent pop-up window: Not totally transparent but more translucent
2) Image in pop-up window: Your own custom image in the pop-up window
3) Transparent & image in pop-up window: Your own custom image with a transparent background
For Custom Image do the following:
- Create folder-bg.png in /home/user/MyDocs/Pictures/.backgrounds/ - Apply the tweak and REBOOT
4) Enlarge pop-up window: Enter ONLY numbers if you wish to deviate from default size. Pressing ONLY the Enter key will revert to default size.
Tweak W 7: Feed-Notification-Multitasking MOD
1. Orange & Blue colors for Feed-Notification
2. Manually Change Colors for Feed-Notification
3. Feed-Notification-Multitasking Name Changer
Here you can change words “Feeds”, “Notifications” and “Nothing open yet”.
Also you can change the size/color of “Nothing open yet”.
For using this tweak, you need to edit 2 files. Go to: /home/user/MyDocs/.N9QTweakBackup/usr/share/l10n/meegotouch and find your files.
At the end of this files you can see 2 letters, that indicate your system language.
For example if my phone in English system language, I would require:
home_en.qm notification_en.qm
Conversely, if my system language was French, I would require home_fr.qm and notification_fr.qm and so on for your system's language.
Transfer these 2 files to your PC and edit with QTLinguist as follows:
In home_XX.qm: edit lines qtn_home_recents_empty and qtn_home_events_feed_title
In notification_XX.qm: edit line qtn_noti_title
Transfer these files back to your phone, to: /home/user/MyDocs/.notifername and apply tweak W, option 7.
You can edit these files whenever you want and then just reapply this tweak again!
4. Restore ALL to Default
A REFRESH is need for application of the tweak.
Tweak W 8: Launcher Indicator & Icon Changer
Choose a Spinner or Progress indicator while waiting for apps to launch!
You can also change your Desktop Icons as follows:
Put your custom icons in /home/user/MyDocs/.launchericons/ according to the following folders:
64x64 – for icons located in: /usr/share/icons/hicolor/64x64/apps (refresh needed)
80x80 - for icons located in: /usr/share/icons/hicolor/80x80/apps (refresh needed)
Icons - for icons located in: /usr/share/themes/blanco/meegotouch/icons (reboot needed)
opt - for icons located in: /opt/your_app/find_your/icon – in this folder you need to create a full path to the icon of your application !!! (refresh needed)
If you are not sure where the desktop icon located, you can check it in: /usr/share/applications/NAME_OF_APP.desktop
The folder named original includes the same folders for backup of your original icons if you want. This tweak will NOT create a backup, you need to do a backup manually.
Also in folder opt - you need to create a full path to the icon of your application !!!
In this thread you can find a some nice icons.
The following command is useful if you wat to replace your icon without REFRESHING your homescren which in turn closes all open apps:
As ROOT:
sed -i 's/Icon/Icon2/;s/Icon2/Icon/g' /usr/share/applications/*.desktop
All icons on the homesceen will be refreshed WITHOUT closing any apps! Some intermittent lag of a few seconds is to be expected to allow the system to cope with the changes!
Tweak W 9: Statusbar Background Changer
A custom image for the Statusbar. Currently, transparent images DO NOT have the required effect.
Method to achieve desired result:
- Create Pstatus.png with 480x36px dimensions and Lstatus.png with 854x36px dimensions in /home/user/MyDocs/Pictures/.backgrounds/ - Apply the tweak - REBOOT
Pstatus.png is for portrait statusbar while Lstatus.png is for landscape. Pstatus.png is sufficient if statusbar is being used ONLY in potrait mode.
Tweak W 10: Restore ONLY Homescreen Backgrounds
This will restore only your homescreen backgrounds and keep other tweaks from Twaek W intact.
Tweak W 11: Restore ALL to Default
This will restore all of Tweak W MODs to Default!
Tweak X: Create a .DEB file from an existing installed app
1. Create a .DEB package: Selecting this option will take you to a menu where you can choose from the following:
A: Backup All User Packages - Selecting this will back up ALL the packages on your system since you last flashed your phone!
O: Backup a Orig Package - This option allows you to backup a single system package
U: Backup a User Package - This option allows you to backup any apps that came pre-loaded in your device or any app that you installed from Store, Apps4Meego, MeeCatalog or any other source including non-trusted sources
ALL backed up .DEBs are stored in /home/user/MyDocs/BackDeb/
NOTE: You need to enter the exact package name of an app for the above to work! You can get the package name by doing the following in terminal as ROOT:
dpkg -l | grep APP_NAME
2. Install ALL Backed-up apps: This will restore all apps that you backed-up in /home/user/MyDocs/BackDeb/ using the above options
3. Uninstall Package Creator: This option uninstalls the creator used to run options 1 and 2 above! Run this only when you don't intend to use Tweak X-1 & Tweak X-2 any further!
Tweak Y: Customize the Statusbar Clock & Clock UI
1. Customize Clock UI: 11 options available for custom Clock UI
2. Customize Alarm UI: Enlarge Alarm UI with this Tweak.
3. Customize Statusbar Clock: Options to change your statusbar clock to HH:MM | DAY DATE OR HH:MM AM/PM | DAY DATE OR a custom string. Refer to [4] for custom string details.
4. Hide Operator Name: Hide/Restore Operator Name from the Statusbar. Note: This Tweak will remove Tweak T's Battery Percentage too
5. Change Color of Operator Name: Self-Explanatory!
This tweak requires a Refresh for changes to be effected! You can run a few options concurrently!
Tweak AA: Uninstall Original Apps [UNDER TESTING]
ONLY to be used by PRO/ADVANCED Users!!!
Under Testing currently, will replace Tweak QQ in the future.
If tweak QQ has been used before, restore all apps back by using Tweak QQ-4.
If further apps were uninstalled not in Tweak QQ restore them before restoring using QQ-4.
To use Tweak AA, you need to choose whether you are running mp-harmattan-001-pr or mp-harmattan-005-pr.
When removing apps, MAKE SURE the mp-harmattan-001/005-pr package is NOT being removed too! This will break your system otherwise!
A typical Twitter uninstallation should look like:
The following packages will be REMOVED
account-plugin-twitter l10n-app-twitter l10n-app-twittershare libmeegotwitter1 twitter twitter-meego twitter-qml webupload-service-twitter
0 upgraded, 0 newly installed, 8 to remove and 0 not upgraded
Again, ENSURE there is NO mp-harmattan-001/005-pr package to be removed too.
If you see the mp-harmattan package being removed too, cancel the removal, restore all apps using this tweak along with a re-installation of mp-harmattan before trying to uninstall an app again.
Tweak BB: Display Tweaker
1. Enable/Disable automatic brightness – You can enable or disable automatic brightness. You also have option for tuning of brightness (from 0 to 225), you can use this after disabling auto-brightness.
WARNING: DON’T put this string to "0", this will switch off your screen!!!
2. Display timeout – You can change which timeout you want in Settings > Device > Display
3. Screen blanking ON/OFF - Enable or disable if screen will go to sleep mode (blanking)
Tweak CC: WLAN MODs
Activate/Deactivate Adhoc at startup for USA users as well as allowing you to change the WLAN MAC address.
Tweak DD: Resize Icon and Text on App Launcher
1. X-small preset: 6 icons in one row
2. Small preset: 5 icons in one row
3. Large preset: 3 icons in one row
4. Change icon text size and color
5. Change icon size separately
6. Reduce the spacing between icons: 5 icons in one row with icon size only slightly reduce due to the spacing between icons covering for the difference! HIGHLY RECOMMENDED!
7. Reset to Default
This Tweak requires a REFRESH to be applied correctly!
Tweak EE: INCEPTION Installer
1. Install Inception
2. Install aegisctl
Tweak FF: N9 QRefresh & N9QT Splash Images
Either one of two refresh options can be added to your Homescreen:
F for Full Refresh - This is full refresh encompassing the statusbar, lockscreen and homescreen.
S for Soft Refresh - This simply refreshes the statusbar and lockscreen.
B for Restart BME - This option restarts the battery monitor which is useful when sufferring a sudden battery drop from ~20% to ~4%. A restart of BME will re-calibrate the battery level of the system to a more accurate value.
Another option in the tweak is to Change the Splash Image of N9QTweak. You can choose a few different colours to do so.
Tweak GG: Change Boot Video & Startup Images
This tweak consists of two parts; changing boot video and/or the startup images.
For Boot Video: Create a short video with the name bootvideo.mp4 and place it in /home/user/MyDocs/Movies/.Bootvideo If the directory isn't present just create it first!
To apply your new Boot Video choose option 1 from the tweak.
For startup images you need to create 3 images with the following names:
startup1.png startup2.jpg startup3.jpg
Take note of the extension difference between images 1 and 2&3. Place these startup images in /home/user/MyDocs/Movies/.Bootvideo and choose option 2 from tweak to apply.
For sample boot videos you can download some from Schturman's dropbox
Tweak HH: Fix MMS Issue on T-Mobile [USA Users]
This tweak will fix the MMS issue for T-Mobile USA Users.
Tweak II: Add/Remove Extra Repos
It is advisable to know what you are doing before using this tweak!
The following repos are available for installation:
1) RZR Community Repository
2) Harmattan SDK Repository
3) N9 Repository for N950 users
4) Supertux2 Repository
5) Harmattan Inception Enabled Repository (aka MAG's incepted repo)
6) Schturman (N9QT) repository: add this repo to your phone so as to receive software updates quicker!
Tweak JJ: Change Behaviour of PowerKey
You have the power the change the behaviour of the PowerKey for both single and double press.
Tweak KK: Files Tweaker
1. Add Twitter Sharing: Add options for sharing videos via Twitter
2. Add Faster Unzip/Unrar/Untar: Immediately Unzip/Unrar/Untar downloaded files from Transfers menu. Find extracted files in /home/user/MyDocs/meerar/NAME_OF_YOUR_ARCHIVE
3. Add Custom File Size for Email Attachments: Change the attachment size limit from the default 5MB. Just enter the value to change to i.e 10 for 10MB
4. Change Default Photo/Video file name: Allows you to tinker the default format of photo/video file name from YYMM to your desired option!
5. Add Haptic Feedback to Calculator: This will give you a nice touch while using the calculator!
6. Remove Album art from Gallery: This option will remove all the album art you have from Gallery by hiding them. For this option to work, all your Music needs to be located in /home/user/MyDocs/Music/
7. Smartsearch Priority Changer: This option lowers the priority of Smartsearch to help improve battery life.
NOTE: Using this option may cause Search to not find the results you need as well as not allow you to choose custom ringtones from within the Settings applet. You can still select a song and set it as ringtone. You just can't do it from within Settings!
8. Scaling Frequency Changer: By Default, idle clock speed of the CPU is 300Mhz. This tweak allows you to change it to give a slight speed boost while waking the phone from idle state. Battery life obviously may be affected slightly.
9. Restore ALL to Default
Tweak LL: Lockscreen & Live Clock Icons
Two options:
- Replace default Clock icon with a Live Clock
- Install Lockscreen app
Tweak MM: ProfileMatic rules Backup & Restore
Backup or Restore your rules from ProfileMatic. A REBOOT is needed after every restore!
Tweak NN: Contacts/SMS Importer
1. Import/Export Contacts
This tweak is only for English, Russian & Spanish Language Settings!
You must export your contacts from the contacts app in the following way first:
- Open Contacts App
- Click on the menu at bottom-right hand corner
- Click Export Contacts
- Choose "File" as the option
All your Contacts are now stored in /home/user/MyDocs/Contacts
When you run this tweak, it will convert all those Contacts into one file named "N9QTallcontacts.vcf"
After running this tweak navigate to /home/user/MyDocs/Contacts using Filebox and you will see the file named "N9QTallcontacts.vcf". Click on it and click on Import hence all Contacts are imported to your device as and when you require (e.g. after a reflash)!
2. Import/Export SMS
Option 1. Export ALL SMS to ONE file: Running this option will create a file named "smsbackup_DD-MM-YYYY_HHMMSS.sms in /home/user/MyDocs/.smsbackup/
Option 2. Import ALL SMS to conversations: This option will import your messages (SMS+IM) into conversations. Before running this option, navigate to /home/user/MyDocs/.smsbackup/ and rename the file you want to restore to smsbackup.sms Once done renaming, you may run this option! Do note that Restored IMs are available for reading only with new IMs from the same user creating a new conversation!
Option 3. Split your Messages: This option will split all your back-ed up .sms files located in /home/user/MyDocs/.smsbackup into /home/user/MyDocs/.smsbackup/sms-backup-repo into individual conversations. This allows you to delete conversations with a particular contact before restoring the other SMSes and IMs. IMs are indicated with a contact's name or IM name in the file name while SMSes are indicated with only the telephone number in the file name!
Option 4. Import Filtered Messages: This option restores the messages split in Option 3 above! All files in /home/user/MyDocs/.smsbackup/sms-backup-repo/ will be merged into one file named filtered.sms which will be restored into your Conversations app! Run this option only after running Option 3 (Tweak NN-2-3)!
Tweak OO: Lock your Favorite Apps
Gallery, Videos, Mail & Messages are the ONLY apps that can be locked using this tweak. A REFRESH is required for the tweak to be applied!
Note: The Lock will NOT work if Mail or SMS or IM is opened from the lockscreen or notification screen!
Options are as follows:
1) Lock App: Change DEFAULT Password and LOCK your App.
2) Unlock App: UNLOCK your App either singly or ALL of them
3) Remove LockApp and Restore to Default: UNLOCKS ALL YOUR APPS and removes LockApp from your device
4) Fix Problem with Duplicated Icons: If you have duplicated icons this will fix things up BUT YOUR HOMESCREEN ICONS ORDER WILL BE RESETTED!!!
Tweak PP: ONE Click Applications Remover
This tweak UNINSTALLS all apps located in the the folder chosen from the following list:
1. /home/user/MyDocs/.downloads
2. /home/user/MyDocs/Downloads
3. /home/user/MyDocs/Programs
Tweak QQ: Uninstall ORIGINAL Apps [Advanced Users Only]
DON'T USE THIS IF YOU ARE NOT A PRO USER!!!
Choose your mp-harmattan package; 001 or 005.
System Packages will be UNLOCKED with this tweak and you can INSTALL/UNINSTALL them on demand.
You can LOCK SYSTEM PACKAGES BACK resulting in a RESTORATION OF ALL REMOVED APPLICATIONS/PACKAGES too!
NEVER proceed if the tweak says your SYSTEM PACKAGE IS LOCKED EVEN AFTER UNLOCKING! Thhis will KILL your system!
Tweak RR: Tweaked Phone Backup/Restore
This Tweak will create a backup of your tweaked phone in /home/user/MyDocs/.N9QTweakedBackup/
This method is the fastest way to restore your tweaks and apps after a reflash etc. The restoration of apps is done by installing all the .deb files located in /home/user/MyDocs/BackDeb/All/
To prevent the restoration of apps or restoring apps from another location follow these steps:
To prevent restoration, delete all .deb files in /home/user/MyDocs/BackDeb/All/
To restore apps from another location, edit /home/user/MyDocs/.N9QTweakedBackup/appinstaller.sh using your favourite text editor. Replace the line containing dpkg -i /home/user/MyDocs/BackDeb/All/* with the path to your desired location instead!
Note: If during the creation of the above backups, inception was not installed/active on your phone, install and active it FIRST before running the restore operation!
Note 2: Tweak T and its packages will NOT be backed up!
Note 3: Ensure you are connected to the Internet before running this tweak!
Tweak UU: N9QT Updater
This option allows you to update N9QTweak to a new version. For example you want to update to v9.5, just enter 9.5 when prompted by the tweak. It will download and install v9.5 (if available) automatically with the .deb file saved to /home/user/MyDocs/Downloads/
This Tweak will not work if you installed N9QTweak from Appsformeego. It is recommended to uninstall N9QTweak if you have installed it from Appsformeego and to install it from the link in the first post of the thread!
Tweak K: Create BACKUP
Self-explanatory with a backup stored in /home/user/MyDocs/.N9QTweakBackup/
Tweak Z: Full RESTORE
ALL Tweaks will be restored but added option to allow you to choose whether to uninstall additional IM providers even with restoring all tweaks. This tweak will NOT restore Tweaks T-1 & T-3 (system-ui) and Tweak B-7 (Vesuri mod)! This tweak also gives you the option to restart or refresh your phone after the restore!
Tweak V: About & Credits
Self-explanatory!
Uninstalling
Two ways:
1) Go to Settings -> Applications -> Manage Applications -> N9 QTweak -> Click Uninstall after choosing it
2) Long press N9QTweak icon on the homescreen and click the the "x" on the icon
Notes on Uninstallation:
- Even after uninstalling the app, Backup files will be stored in /home/user/MyDocs/.N9QTweakBackup/
- You can use the above backup files to restore your tweaks manually after uninstallation if you forgot to do it before
- If you want only a one time command to restore run the following as ROOT in terminal:
sh /home/user/MyDocs/.N9QTweakBackup/RESTORE
Do take note that this command does the following:
1) Restores all tweaks to default [except for Extraplugins Tweak I]
2) Deletes the folder .N9QTweakBackup from your phone
3) Refreshes home and locksreens
Troubleshooting
Getting a Clean Backup
There are three methods to do so:
Method 1 [N9QTweak]:
1) Ensure you are connected to the internet
2) Run Tweak L from N9QTweak
3) The clean backup will be stored in /home/user/MyDocs/.N9TweakBackup
4) Just run a restore from N9QTweak to apply it!
Method 2 [PC + USB Cable + N9]:
1) From the first post of the thread click on the link "my clean backup"
2) Download the file to your PC and extract from the ZIP archive
3) Connect the N9 to your PC using the USB cable via "Use as mass storage" mode
4) Copy the extracted folder from the zip archive ".N9QTweakBackup" to your phone
5) Now disconnect your phone and you can use the app to do a restore from the clean backup you just transferred to your phone
Method 3 [N9 Browser + Filebox]:
1) From the first post of the thread click on the link "my clean backup"
2) Save the file to your N9. If it says the format is wrong just click OK to SAVE.
3) Once Transfer is Completed, DON'T press Clear; instead click on Done.
4) Open Filebox app and navigate to /home/user/MyDocs/Downloads/
5) Double click on file named: N9QTweakBackup_9.3.6_all.zip
6) Click "Extract Files" and press the UP ARROW ONCE to navigate to /home/user/MyDocs/
7) Click "Extract Here" and if prompted, click "Override all".
Installation Issues
Unable to use N9QTweak after Installation
1) Go to Settings -> Applications -> Manage Installations -> N9 QTweak -> Uninstall. Reboot phone and try installing N9QTweak again.
2) If the above did not resolve the issue, UNINSTALL as above again. Open Filebox app as ROOT, navigate to /opt/ and delete the folder named "N9QTweak". Alternatively, you may delete the folder using Terminal too. Open Terminal -> devel-su -> ENTER_PASSWORD -> rm -rf /opt/N9QTweak/
3) Once the folder above is deleted, reboot and open Terminal and do the following:
devel-su ENTER_PASSWORD [default is rootme] dpkg -i /path/to/installation/file/of/N9QTweak
Fixing Reboot Loop(s)
Mounting the N9 to a PC (Linux Users Only) [Fix MALF State]
WARNING: The below steps will put your phone into Open Mode!
Note: The instructions are valid on the N9 even though using N950 kernel
Note 2: The below instructions would work if you know which Tweak(s) you applied before facing the reboot loops
Note 3: For original files required in step 7 below copy it either from the Clean Backup or request for it in the N9QTweak thread
1. Download the following files from their links and save to /home/$USER/Downloads/ where $USER is your username on the PC
flasher (download 32/64-bit according to your system)
2. Open terminal on your PC and type:
sudo su
{enter your password}
cd /home/$USER/Downloads
flasher --load -k vmlinuz-2.6.32.20112201-11.2-adaptation-n950-bootloader -n initrd.img-rescue-2.6.32.20112201-11.2-n950 --boot
3. A message will pop-up saying Suitable Device/Phonenet not found...
4. After the above message appears, plug in your POWERED-OFF N9/50 to the PC. Make sure your phone is switched off beforehand; to be sure press the power button for 8 seconds to switch it off
5. Wait 1-3 minutes and your N9 should appear as 3 removable partitions on the system:
/dev/sdX1 which is MyDocs, /dev/sdX2 which is rootfs and /dev/sdX3 which is the home directory (userfs).
6. If the partitions are not mounted, you can check for their presence either by using GParted Partition Editor or typing the following in terminal:
fdisk -l
7. Now to fix the problem use the original file to replace the modified file in your rootfs partition (sdX2)
8. Once you are done, unmount the 3 partitions by clicking on eject on your system
9. Upon unmounting completing, plug out your phone from your PC and power it on; the issue should have been resolved now!
Removing Warranty Void Message after Fixing Reboot Loop
If you wish to remove the warranty void message that appears at every boot-up follow the below steps:
1. On your N9/50 do the following in terminal:
devel-su
{enter password - default is rootme}
/bin/dd if=/dev/mmcblk0p2 of=/home/user/MyDocs/rootfs_backup.img
/bin/dd if=/dev/mmcblk0p3 of=/home/user/MyDocs/userfs_backup.img
The above steps will take quite some time so please be patient. At the end of the above you should get a 4GB rootfs_backup.img and a 2GB userfs_backup.img
2. Copy the rootfs_backup.img and userfs_backup.img from your device to your Linux PC. In these steps we presume to have copied the .img files to home/$USER/Downloads/ where $USER is the username of your PC
3. On your PC, download the stock firmware image for your device, save it to /home/$USER/Downloads with the name rootfs.bin. Take note, we DO NOT use the emmc.bin image!
4. Open terminal on your PC and type the following:
sudo su
{enter your password}
cd /home/$USER/Downloads
flasher -f -F rootfs.bin -R
5. Plug in your POWERED-OFF device once the Suitable Device/Phonenet not found message appears
6. Let the flash complete after which your phone will boot-up
7. Don't PANIC to see your data etc is missing and head to Settings->Security->Developer Mode->Install
8. After Developer Mode is intalled, your Device will reboot after which open terminal on your DEVICE and type:
disclaimer-cal remove View-openmode
9. Power off your device and on your PC type the following in the PC's terminal:
sudo su
{enter your password}
cd /home/$USER/Downloads
flasher --load -k vmlinuz-2.6.32.20112201-11.2-adaptation-n950-bootloader -n initrd.img-rescue-2.6.32.20112201-11.2-n950 --boot
Plug in your POWERED-OFF DEVICE only when the "Suitable Device/Phonenet not found..." message appears!
The vmlinuz and initrd files required in the above are the same which were used in Fixing the Reboot Loop via Mounting on PC!
10. As per the fixing reboot loop step, you will get 3 partitions of the N9 appearing in your PC as follows:
/dev/sdX1 which is MyDocs, /dev/sdX2 which is rootfs and /dev/sdX3 which is the home directory (userfs).
11. Once the partitions are detected, we get your images mounted into them. So in terminal on your PC type:
sudo su
{enter your password}
cd /home/$USER/Downloads/
dd if=/home/$USER/Downloads/rootfs_backup.img of=/dev/sdX2
dd if=/home/$USER/Downloads/userfs_backup.img of=/dev/sdX3
The above will take some time to finish so be patient!
12. Once step 11 is finished, you can unmount the 3 partitions of your Device from your PC by clicking on the eject button on the explorer window on your PC.
13. After unmounting, plug out your Device from your PC and power it on; you'll see the warranty void message to have disappeared and all your data restored!
RD Mode
This method will attempt to boot up your N9 using RD mode allowing you to repair any tweaks that you may applied wrongly!
There is NO guarantee this method will fix your N9 but its highly probable that if you messed up tweaks for appearance, statusbar, system-ui etc this method should fix it up for you!
You will need flasher for this process!
1. On your PC run cmd.exe as administrator and type the following:
cd C:\Program Files\Nokia\Flasher {change the path according to where you installed flasher}
flasher --enable-rd-mode --set-rd-flags=no-lifeguard-reset
2. Once a message appears saying "Suitable Device/Phonenet not found..." plug in your POWERED OFF Device to your PC
3. RD mode is enabled if a message on cmd.exe appears stating RD mode enabled. Now you may plug out your device from your PC and boot it up. A further sign of RD mode being enabled is the wrench icon you will find at boot-up as well as flashing Camera LEDs and flashing notification LEDs.
4. Once your system is booted up, replace the modified files with those from a clean backup or re-install the necessary system packages to fix the reboot loop.
5. Upon Completion, power off your device and disable rd mode by typing the following on your PC in cmd.exe which is run as administrator:
cd C:\Program Files\Nokia\Flasher {change the path according to where you installed flasher}
flasher --disable-rd-mode
6. Boot up your N9 after the above and the reboot loop should be resolved; if it still isn't you need to repeat the above steps and ensure you use a clean backup from the N9QTweak thread to restore all tweaks!
Changelog
Version 9.1.1 [09.10.12]
- Tweak Z - updated
- Tweak K - updated
- Tweak RR - updated, integrated installation of all user apps via script and added backup of "grob" file (UA)
- Tweak R - updated (black theme)
- Tweak DD - Added option for reducing the space between icons
- Tweak KK - updated, creating .deb file extracted and moved to Tweak X. Added option to change default name of created photo/video files (YYMM), Albumarts remover, Scaling frequency changer
- Tweak X - Creating deb files (single of user or system and all user installed)
- Tweak I - extraplagins updated to new version.
- Tweak C - REMOVED; content moved to Tweak KK
- Start script changed, no more problem with installation of bash
- Fixed an issue of green icon appearing when installed via terminal
IMPORTANT: In installation process this version will create a backup of some files for Tweak M, Tweak RR (grob) & Tweak KK (will not be in the next version).
Version 9.1.2 [10.10.12]
- Tweak G - updated restore option
- Tweak KK - updated changing photo/video name as well as added a separate option for open mode users
- Postinst script changed to check if you are have an active internet connection as well as wget before attempting to download the PDF instructions file to your Documents folder.
A fail in the check will save another PDF file to your Documents folder which would contain the links for you to manually download the full instructions.
Version 9.1.3 [11.10.12]
- Tweak T - updated option 3 adding support for LED event notifier for Wazapp
- Start script updated - added menu of PDF instruction downloader
Version 9.2 [14.10.12]
- Tweak Z - updated
- Tweak RR - updated
- Tweak KK - updated option 4.
- Tweak NN - renamed, added new option "Export/Import SMS" (see PDF instruction)
- Tweak M - updated, added option to change UA for Open mode users.
- Tweak X - updated, removed installation option, it will install needed package automatically from first option.
Version 9.3 [16.10.12]
- RESTORE file updated (added option for Open mode users).
- Tweak Z - updated, added option for Open mode users.
- Tweak RR - updated, added option for Open mode users.
- Tweak R - updated, added option for Open mode users.
- Added Tweak UU - N9QT updater
Version 9.3.1 [17.10.12]
- Tweak Z - updated
- Tweak II - updated, added N9QT repo
IMPORTANT: In installation process it will install N9QT repo (will be removed in next version)
Version 9.3.3 [19.10.12]
- Tweak RR - updated, added checking of internet connection before start.
- Tweak M - updated, fixed "Opera tablet" button.
- Tweak O - updated, added splash image to "Catch Apps" button.
- Tweak FF - updated, added splash image to "N9 QRefresh" button.
- Added Tweak C - changelog.
- No more password request for N9QT, "Catch Apps", "N9 QRefresh"
- Added Notification to notifications screen.
Version 9.3.4 [21.10.12]
- Added Tweak L - Clean backup downloader.
- Tweak G - updated patch for option 2, now you don't need to revert before applying new patch. Output removed.
- Tweak RR - updated.
- Tweak Z - updated.
- Tweak FF - updated, added new option to refresh button and at the end of N9QT (See PDF).
- Clean backup file updated.
IMPORTANT: In installation process it will save 1 file for tweak G-2 (will not be present in next version)!
Version 9.3.5 [23.10.12]
- Tweak Z - updated.
- Tweak RR - updated.
- Tweak E - updated, added apkenv.
IMPORTANT: For those who have N9QT installed from apps.formeego client and got system updates, NO MORE system updates! Please remove this version and install new one from the first post!
Version 9.3.5a [24.10.12]
- Tweak E - updated, added support of new game - Angry Birds (2.3.0). Just reapply option 1 (Install apkenv) and after this choose the new game from option 2.
Name of PDF file NOT changed!
Version 9.3.6 [26.10.12]
- Tweak Z - updated.
- Tweak RR - updated.
- Tweak OO - updated, added option to lock N9QT.
- Tweak E - updated, added option for saving games scores; you will need to do it manually after each played game! For activating this option, reinstall apkenv ONLY once => option 1.
- Tweak D - updated, added dannejanne keyboard theme.
Credits for N9QTweak
Creator & Developer: Schturman
Thanks to the Following People [not in any particular order]:
Almehdi [5], hxka [6], Ammyt [7], 3llipsis [8], wook_sf [9], iidar_sh [10], leo1994 [11], Camerado [12], hooddy [13], superjunior [14], Jflatt [15], sony123 [16], colin.stephane [17], mbanck [18], F2thak [19], CODeRUS [20], Fenol [21], AJMAL P.M [22], eccenux [23], Arie [24], kuzmichov [25], r0mis [26], alxs_as-is [27], dvarlamoff [28], MohammadAG [29], Ancelad [30], cckwes [31], hungthai_pt [32], OSCho [33], Gnome [34], itsnotabigtruck [35], aegis [36], nikkirov [37], Craig_Mabbitt [38], HanzBlix [39], Iktwo [40], guillermorojaz [41], thedead1440 [42], Shayco, Niwakame [43], Rusnak-COBRA [44], Shaun,
nba0nb [45], Crabstick [46], wellef [47], latency [48], flopjoke [49], farfary [50], wwwjfy [51], wolke [52], MFaroTusino [53], thp [54], Kozzi [55], dannejanne [56]