• Intro
• Downloads
• Community
• Development
• News
• TALK

Knots2

Knots is a feature rich GPLv2 Video Streaming Application for Windows, Mac OS X Leopard, Linux and FreeBSD by Janne Mäkinen. Knots consists of a server, written in Ruby, and client, written in Vala. The server can be configured to stream video files (any format/codec supported by VLC), DVB-broadcasts, custom playlists or any other media to a Knots client on a N8x0 or to any other computer, via the Knots' Web-frontend.

Non-tableteers can access the Knots Web-frontend from any platform / location (including Windows). Firefox & Adobe's Flash Plugin 10 are suggested and work best. Knots will automatically transcode all streams to flv, so they can be watched directly in the browser. It is also possible to view videos without transcoding, using the VLC browser plugin.

Contents 1 Features 2 Installation 2.1 Dependencies 2.1.1 Linux 2.1.2 OS X 2.1.3 Windows 2.2 Server 2.2.1 Linux / FreeBSD / OS X 2.2.2 Windows 2.3 Setup 2.4 Client 3 Screenshots 4 Questions & Answers 4.1 Windows 4.2 Linux 4.3 OS X 4.4 Server 4.5 Client 4.6 Media 5 Contact 6 Donate

Features

• Fully thumb driven intuitive GUI for the Nokia N8x0 tablets
• Stream videos with on-the-fly transcoding to a Knots client or to a remote computer via the web-frontend. Seeking is supported when possible.
• Stream VDR Live-TV and recordings
• Playlist support (WorldTV99, etc.)
• Automatic subtitle fetching for movies, provided by http://www.opensubtitles.org
• Automatic thumbnails for local clips using ffmpeg
• Integrated search function
• Additional info for movies, provided by http://themoviedb.org

Installation

To get Knots running, some dependencies have to be met. After that, the server package and the tablet client must be installed. The following steps will guide you in those tasks.

Dependencies

Knots server uses VLC for streaming and FFmpeg for encoding. The following steps explain how to setup those dependencies.

Linux

This instructions are for Ubuntu Karmic Koala (9.10) 32 and 64 bit. Other Debian derivates might use slightly different package names, but the general concept of the install is the same for all distros.

apt-get install ruby1.8 ruby rubygems libsqlite3-ruby libopenssl-ruby vlc ffmpeg 

• Add the Medibuntu repository (for ffmpeg), reload your Package information, update your system and open a root terminal (sudo -s), and:

apt-get install libavcodec-unstripped-52 libavdevice-unstripped-52 libavfilter-unstripped-0 libavformat-unstripped-52 libavutil-unstripped-49 libpostproc-unstripped-51 libswscale-unstripped-0 ubuntu-restricted-extras

To get the best result, ubuntu users should compile ffmpeg themselves. Here and here are good guides, you only need to copy-paste few lines.

OS X

Install latest VLC and ffmpegX to /Applications.

Windows

Download and install latest VLC. For easy setup, install it under C:\Program Files, otherwise you will need to edit the path in server settings.

Server

Linux / FreeBSD / OS X

• nix compatible OS users can get the latest client and server with git:

git clone git://github.com/solmis/knots.git

Then start the server with

cd knots
./knots.rb

OS X users can create a standalone app too:

./install/create_osx_app

knots2 application should appear in your home folder. You can move to that to /Applications. After running the application an icon appears in the dock which then disappears, but knots should be running.

Windows

Install Git for Windows from here. Select the defaults if you don't know what the options mean. Once it's installed, open cmd.exe and run these commands:

cd c:\
git clone git://github.com/solmis/knots.git

Then download the server package from here. Unzip it somewhere (not c:\) and copy the ruby folder and run.cmd to c:\knots. Then copy win32/sqlite3.dll to Windows\System32 with administrator rights. If you accidentaly skip this step and get the error about missing sqlite3.dll, delete the .config folder inside knots folder or the needed programs are not automatically scanned. Double click on run.cmd to start the server. Be sure to close the window with ctrl-c, otherwise VLC is left running.

Setup

Just point your browser to http://localhost:1978 and add your media under settings. If you don't see the Update collection button, please make sure that both ffmpeg and VLC paths are correct.

Client

Knots2 N8x0 Client is available from the extras-repository for OS2008 (Diablo).

The Client for the N900 (Fremantle) is still in alpha state and not ready for prime-time yet. Although advantageous people can have a peek in the current develpoment state by enabling extras-devel repository and pull the client from there.

NOTE: Please bear in mind that the N900 client is still unfinished. You might come across bugs and other strange behavior (like quickly draining battery ect.) since mplayer currently can't utilize the full potential of the N900's hardware. If you are not willing to deal with those limitations you should NOT use the Knots2 Client on your shiny new device yet.

Screenshots

Questions & Answers

Windows

• I get no screenshots, even when i click on Grab screenshot button.

  Make sure knots' path doesn't contain spaces or weird characters. Will try to fix this issue later.

• I want to run knots as a windows service.

  Follow these steps.

Linux

• I can't view any videos.

  Did you install the -unstripped packages of the FFmpeg libs? FFmpeg in Linux is a problem because all the license issues etc. so if your distro doesn't provide unrestricted builds you need to compile your own FFmpeg with at least libmp3lame and xvid support. Run ./scripts/vlctest to check what is wrong with your VLC/FFmpeg combo.

OS X

• Seeking freezes the video for a while and then stops it.

  This is a VLC issue. It seems to have problems with certain codecs, mainly xvid/divx. Try updating VLC from time to time and see if it that helps. Or better yet, issue a bug report.

Server

• Page content doesn't seem to update.

  That's because all tabs keep their state. Double click on the tab to force a refresh.

• I don't see the Update collection -button under settings.

  Make sure both VLC and FFmpeg have correct paths.

• Certain videos only have sound.

  Go to settings, edit the n8x0 transcoding profile and add a value 24 to fps and save. Try playing the video again.

• Lyrics don't work.

  Lyrics-site seems to be down from time to time, try leaving it alone for few days and try again.

• Can I use VLC browser plugin to view the video without transcoding?

  Sure. Edit the passthrough profile and add a value vlc to embed and save. VLC plugin doesn't seem to close properly though, so you may need to restart the browser to kill it.

• I downloaded a video from Youtube. It plays in the browser, but the sound is funny.

  You need to use 22050 audio rate. Edit the profile you are using or create a new one for it.

• I want to use VDR / MythTV but can't find a setting for them.

  Run ./install/vdr or ./install/mythtv and answer the questions. Double click on Settings tab and you should see a button that updates them. If your VDR has several channels, be sure to change Capture screenshots for external urls to 0 before scanning them. Then change it back to 1 and use the Edit button to grab only the screenshots you want.

• How can I make the server output some debugging messages to the terminal?

  Run "./scripts/setup devel 1 Developer" and restart the server.

• Can I use the server to view stuff from the internet?

  Yes, just enable SSL and add an admin user account. You need to open/forward the port you are using and then 19780 for the actual http-stream (and +1 for each additional streams). Client won't work with SSL, so you need to disable ssl if you want to use the client on your lan. This feature is for more advanced users, but if you want to use it, drop by at our irc channel and we will help you with it.

Client

• How come the video plays fine with the client, but not when moved to the device?

  Knots transcodes everything to a format your tablet supports. If your VLC can play it on your desktop, chances are your tablet then plays it as well.

• My Client does not have icons as shown in the screenshots above. How do I add them?

  The icons shown in the screenshots can be downloaded here. Assign them in the web-frontend to the Main Categories (Video, Music, Television) on the "Edit Media" Tab. Icons for Virtual Categories (Latest, Unviewed, Unwatched) can be assigned on the "Settings" tab.

• I see no rotation menu item.

  Please see Rotation

• I'm using Mer and I want to use Knots as a music player, but I can't connect to server.

  That's because Mer has no support for libconic. Restart the client after running this command in terminal:

gconftool-2 -s /apps/knots/ignore_conic true -t string

Media

• Some of my audio/video files aren't scanned.

  You can add the the missing file extensions under settings and do a rescan. To keep the dependencies low, I only support mp3-tags out of the box. But it doesn't mean other audio formats won't work, they just don't get tagged properly.

• I have a folder with recorded tv-series and I want to move them all to Series category. How do I do that?

  Go to Edit media, limit search results to - to list them all and use the path as a search criteria. Once they are listed, click on Select all, add a category or select the one you want to move them to, select Set category action and press Apply to selected. All selected videos are then moved to that category. Same idea works with all the actions.

• My mp3-tags are messed up and I have the same album with 3 different names. Can i easily fix that?

  Sure. Just go to Edit media, select the album tag, then select the wrong value and rename it to the correct one. All the songs that are in that album are moved to the correct album. Do it for all the wrong names and all the songs should be in the same album.

• Can I play DVDs with Knots?.

  Possibly. Go to settings and click on Add a new setting. Name it DVD Drive, key is dvd_drive and value is a path to your CD-ROM drive. In Windows this is possibly D:\, in Linux /media/dvd and in OS X it's /Volumes. Insert the DVD in drive and select Go to root from the client menu. You should see the name of the DVD. Make sure the DVD is recognized before trying to update the page or it may not be properly scanned.

Contact

Please join our IRC channel #knots at Freenode or email janne dot makinen at surffi dot fi

Donate

Knots 2 is free software, but if you feel like donating, you can donate via Paypal.