N900 USB networking

(Starting USB network mode)
(Stopping USB network mode)
Line 57: Line 57:
=== Stopping USB network mode ===
=== Stopping USB network mode ===
-
Unplug the cable to stop the USB network mode.
+
This is optional. It is not necessary to stop the interface after unplugging the USB cable.
 +
 
 +
However, to stop the USB interface, unplug the USB cable and execute the following in 'X Terminal'
 +
<pre>
 +
sudo gainroot
 +
ifdown usb0
 +
</pre>
== Host USB Network Configuration ==
== Host USB Network Configuration ==

Revision as of 17:02, 22 November 2009

This page describes how to enable Networking on the N900 via USB. The first part describes how to configure the Nokia N900 as a USB pluggable network device. The second part describes how to configure various platforms to use the Nokia tablet as a network device. This article is based loosely on the Maemo 4.x wiki for configuring USB networking.

You might want to use the tablet as a USB network device to log into your tablet remotely, or to transfer data from your tablet to another computer, in a situation where wifi or bluetooth are not an option. If you wish to connect your tablet to a Linux machine over TCP/IP, the PC connectivity section in the Maemo SDK documentation also contains useful information.

WARNING Currently there is a bug in the g_ether.ko driver of OS2008 (both 4.0.1 and 4.1) which prevents USB networking from working correctly with Windows machines (but not with Linux machines). See bug #3243 for details. The bug was introduced somewhere between kernels 2.6.18 and 2.6.21, so Maemo versions based on 2.6.18 kernels (e.g. OS2007 and earlier) will work.

Contents

N900 USB network configuration

There is a default USB network interface configuration on Nokia N900. In the file /etc/network/interfaces, you should see a section which looks like this:

auto usb0
iface usb0 inet static
       address 192.168.2.15
       netmask 255.255.255.0
       gateway 192.168.2.14

With this default configuration, the N900 USB interface will have the IP address 192.168.2.15, and the remote end will have the IP address 192.168.2.14. By default, the USB network interface on the N900 is configured

Starting USB network mode

Plug one end of the USB cable on the host and the other end into the N900. The N900 will bring up the mode-selection dialog. Select 'PC Suite mode'.


USB Mode-Selection dialog


Open a root shell in 'X Terminal' on the N900 and activate the interface by executing the following:

sudo gainroot
ifup usb0

If all went well, no errors will be displayed. The command 'ifconfig usb0' will give the following output:

Nokia-N900-42-11:~# ifconfig usb0
usb0      Link encap:Ethernet  HWaddr F2:50:8F:04:1D:8B  
          inet addr:192.168.2.15  Bcast:192.168.2.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1021 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2003 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:86091 (84.0 KiB)  TX bytes:2556598 (2.4 MiB)

You should also be able to ping 192.168.1.15

Nokia-N900-42-11:~# ping 192.168.2.15
PING 192.168.2.15 (192.168.2.15): 56 data bytes
64 bytes from 192.168.2.15: seq=0 ttl=64 time=0.367 ms
64 bytes from 192.168.2.15: seq=1 ttl=64 time=0.214 ms
^C
--- 192.168.2.15 ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max = 0.214/0.290/0.367 ms

Stopping USB network mode

This is optional. It is not necessary to stop the interface after unplugging the USB cable.

However, to stop the USB interface, unplug the USB cable and execute the following in 'X Terminal'

sudo gainroot
ifdown usb0

Host USB Network Configuration

The Host configuration is detailed in Maemo 4.x USB Networking wiki. Please refer to it for details.