USB GPRS

("Option" HSDPA Modem)
("Option" HSDPA Modem)
Line 15: Line 15:
== "Option" HSDPA Modem ==
== "Option" HSDPA Modem ==
* compile the "HSO" Option Modem kernel module (Greg Kroah-Hartman is in the process of integrating the kernel module into the mainline kernel, but check [http://www.pharscape.org/component/option,com_forum/Itemid,68/page,viewtopic/t,445/ HSO] in the meantime) for the Nokia N800.
* compile the "HSO" Option Modem kernel module (Greg Kroah-Hartman is in the process of integrating the kernel module into the mainline kernel, but check [http://www.pharscape.org/component/option,com_forum/Itemid,68/page,viewtopic/t,445/ HSO] in the meantime) for the Nokia N800.
-
* compile the "rezero" Option mode switch application ([http://www.pharscape.org/component/option,com_forum/Itemid,68/page,viewtopic/t,425/ Rezero]).
+
* compile the [http://www.pharscape.org/component/option,com_forum/Itemid,68/page,viewtopic/t,425/ Rezero] Option mode switch application.
* run the Option mode switch application: "./rezero /dev/sg0".
* run the Option mode switch application: "./rezero /dev/sg0".
* load the "HSO" kernel module: "insmod hso.ko".
* load the "HSO" kernel module: "insmod hso.ko".

Revision as of 20:59, 23 July 2008

Contents

Purpose

Get external USB 3G HSDPA GPRS Modems to work with the Nokia N800 (or newer).

Steps

  • Enable USB host mode.
  • get a powered USB hub.
  • connect your Nokia N8x0 to the USB hub's uplink.
  • connect your USB Modem to one of the USB hub's normal ports.
  • switch your Nokia N8x0 to USB host mode ("echo host > /sys/devices/platform/musb_hdrc/mode").
  • compile a SCSI generic Linux kernel module (or download a binary module from CDROM Kernel Modules ).
  • load the SCSI generic Linux kernel module: "insmod sg.ko".

"Option" HSDPA Modem

  • compile the "HSO" Option Modem kernel module (Greg Kroah-Hartman is in the process of integrating the kernel module into the mainline kernel, but check HSO in the meantime) for the Nokia N800.
  • compile the Rezero Option mode switch application.
  • run the Option mode switch application: "./rezero /dev/sg0".
  • load the "HSO" kernel module: "insmod hso.ko".
  • edit the "connect.sh" script (from HSO) to actually do the changes in the routing table.
  • run the "connect.sh" script: "./connect.sh up".
  • enjoy.

= Unused

TODO

  • make a ready-to-use Debian package.