MADDE/Packaging

(→Additional information)
 
(5 intermediate revisions not shown)
Line 1: Line 1:
 +
{{MADDE}}
 +
===Introduction===
===Introduction===
This guide explains how to take a simple [[Qt-Maemo|Qt]] application and compile it so that it deploys to the [[Nokia N900|N900]] with an Icon. It is supposed to be step by step guide on how to take a (simple) Qt app and package and deploy it with an Icon using [[MADDE]].
This guide explains how to take a simple [[Qt-Maemo|Qt]] application and compile it so that it deploys to the [[Nokia N900|N900]] with an Icon. It is supposed to be step by step guide on how to take a (simple) Qt app and package and deploy it with an Icon using [[MADDE]].
Line 9: Line 11:
=== Steps ===
=== Steps ===
-
1. Create simple project through Madde.
 
-
  mad pscreate -t qt_simple projectname
 
-
2. Edit and test with QT Creator (or whatever your favorite tool is).
+
<ol>
 +
<li>Create simple project through MADDE.
 +
  mad pscreate -t qt_simple projectname</li>
-
3. Once ready to deploy create a clean empty top level folder "<projectname>-0.x" where x is your revision number e.g. "c:\Madde\0.5\home\shep\wwcalc-0.1"...In the OS  
+
<li>Edit and test with Qt Creator (or whatever your favorite tool is).</li>
 +
 
 +
<li>Once ready to deploy create a clean empty top level folder <code><projectname>-0.x</code> where <code>x</code> is your revision number, for example <code>C:\Madde\0.5\home\shep\wwcalc-0.1</code> in the OS  
'''Note: the following 3 steps apply each time you go to build.'''
'''Note: the following 3 steps apply each time you go to build.'''
-
   3.1 ensure there is no "debian" folder at the same level as "src"
+
   <ol><li>ensure there is no <code>debian</code> folder at the same level as <code>src</code></li>
-
   3.2 ensure there is no folder structure called "<projectname>-0.x-orig" left over from a failed compile
+
   <li>ensure there is no folder structure called <code><projectname>-0.x-orig</code> left over from a failed compile</li>
-
   3.3 remove old compiles from the Madde\home\user (e.g. C:\Madde\0.5\home\Shep) folder.
+
   <li>remove old compiles from the <code>Madde\home\user</code>, for example <code>C:\Madde\0.5\home\Shep</code> folder.</li></ol></li>
-
4. Copy the "src" folder from the tested Qt project into the "<projectname-0.x" folder
+
<li>Copy the <code>src</code> folder from the tested Qt project into the <code><projectname-0.x</code> folder</li>
-
5. Create (or obtain) an application Icon. This should be a 64x64 png. Call it <projectname>.png and place it in the "src" folder.
+
<li>Create (or obtain) an application Icon. This should be a 64x64 PNG. Call it <code><projectname>.png</code> and place it in the <code>src</code> folder.</li>
-
6. Again inside the "src" folder create a new file called "<projectname>.desktop"
+
<li>Again inside the <code>src</code> folder create a new file called <code><projectname>.desktop</code>
Code:
Code:
-
  [Desktop Entry]
+
<pre>
-
  Encoding=UTF-8
+
[Desktop Entry]
-
  Version=0.x
+
Encoding=UTF-8
-
  Type=Application
+
Version=0.x
-
  Name=<Long Descriptive Project Name>
+
Type=Application
-
  Exec=/usr/bin/<projectname>
+
Name=<Long Descriptive Project Name>
-
  Icon=<projectname>
+
Exec=/usr/bin/<projectname>
-
  X-HildonDesk-ShowInToolbar=true
+
Icon=<projectname>
-
  X-Osso-Type=application/x-executable
+
X-HildonDesk-ShowInToolbar=true
 +
X-Osso-Type=application/x-executable
 +
</pre></li>
-
7. Inside the "src" folder added a file called "src.pro". Getting this right is the key to getting the Makefile correct and hence the install working. At the end of this file there is a section called "INSTALLS += "...for every file you want installed in a location you need an entry here. In the example here we install the target, icon and desktop files.
+
<li>Inside the <code>src</code> folder added a file called <code>src.pro</code>. Getting this right is the key to getting the Makefile correct and hence the install working. At the end of this file there is a section called <code>INSTALLS += ...</code> for every file you want installed in a location you need an entry here. In the example here we install the target, icon and desktop files.
Code:
Code:
-
  TARGET = wwcalc
+
<pre>
-
  TEMPLATE = app
+
TARGET = wwcalc
-
  SOURCES += qtmain.cpp \
+
TEMPLATE = app
-
      mainwindow.cpp  
+
SOURCES += qtmain.cpp \
-
  HEADERS += mainwindow.h  
+
    mainwindow.cpp  
-
  FORMS += mainwindow.ui  
+
HEADERS += mainwindow.h  
-
   PREFIX = ../debian/wwcalc/usr
+
FORMS += mainwindow.ui  
-
 
+
 
-
  unix {
+
unix {
 +
   PREFIX = /usr
   BINDIR = $$PREFIX/bin
   BINDIR = $$PREFIX/bin
   DATADIR =$$PREFIX/share
   DATADIR =$$PREFIX/share
-
 
+
 
   DEFINES += DATADIR=\"$$DATADIR\" PKGDATADIR=\"$$PKGDATADIR\"
   DEFINES += DATADIR=\"$$DATADIR\" PKGDATADIR=\"$$PKGDATADIR\"
-
 
+
 
   #MAKE INSTALL
   #MAKE INSTALL
-
 
+
 
   INSTALLS += target desktop icon64  
   INSTALLS += target desktop icon64  
-
 
 
-
    target.path =$$BINDIR
 
-
 
 
-
    desktop.path = $$DATADIR/applications/hildon
 
-
    desktop.files += wwcalc.desktop
 
-
 
 
-
    icon64.path = $$DATADIR/icons/hicolor/64x64/apps
 
-
    icon64.files += wwcalc.png
 
-
  }
 
-
8. Up one level and inside the top level folder (i.e. "c:\Madde\0.5\home\<YOU!>\<projectname>-0.x" ) create a file called "<projectname>.pro" with the following exact contents.
+
  target.path =$$BINDIR
 +
 
 +
  desktop.path = $$DATADIR/applications/hildon
 +
  desktop.files += wwcalc.desktop
 +
 
 +
  icon64.path = $$DATADIR/icons/hicolor/64x64/apps
 +
  icon64.files += wwcalc.png
 +
}
 +
</pre></li>
 +
 
 +
<li>Up one level and inside the top level folder (that is,  <code>C:\Madde\0.5\home\<YOU!>\<projectname>-0.x</code> ) create a file called <code><projectname>.pro</code> with the following exact contents.
Code:
Code:
-
  TEMPLATE = subdirs
+
<pre>
-
  SUBDIRS  = src
+
TEMPLATE = subdirs
 +
SUBDIRS  = src
 +
</pre></li>
-
10. In Madde make sure the runtime is up and connectible (described here: http://wiki.maemo.org/MADDE/Device_runtime) and then execute.
+
<li>In Madde make sure the [[MADDE/Device runtime|runtime is up and connectible]] and then execute.
Code:
Code:
-
  mad dh_make --createorig --single -e foo.bar@gmail.com -c gpl
+
<pre>
-
  *** Several people have commented that mad qmake is not required, but I find there are times that it is, igonre this next line if you wish ***
+
mad dh_make --createorig --single -e foo.bar@gmail.com -c gpl
-
  mad qmake
+
</pre>
-
  mad dpkg-buildpackage
+
''Several people have commented that mad qmake is not required, but I find there are times that it is, ignore this next line if you wish''
-
  mad remote -r org.maemo.<projectname> send ../<projectname>_0.x-1_armel.deb
+
<pre>
-
  mad remote -r org.maemo.<projectname> install <projectname>_0.x-1_armel.deb
+
mad qmake
 +
mad dpkg-buildpackage
 +
mad remote -r org.maemo.<projectname> send ../<projectname>_0.x-1_armel.deb
 +
mad remote -r org.maemo.<projectname> install <projectname>_0.x-1_armel.deb</pre></li>
-
11. Uninstalling - from an X_Terminal.
+
<li>Uninstalling - from an X_Terminal.
Code:
Code:
-
  sudo gainroot
+
<pre>
-
  dpkg -r <projectname>
+
sudo gainroot
 +
dpkg -r <projectname></pre></li></ol>
== Additional information ==
== Additional information ==
-
* [[Packaging a Qt Application]]
+
* [[Packaging a Qt application]]
* [[Packaging]]
* [[Packaging]]
-
 
[[Category:Development]]
[[Category:Development]]
[[Category:Qt]]
[[Category:Qt]]

Latest revision as of 13:55, 18 June 2010

Image:Ambox_notice.png
 MADDE is currently a technology preview.

These instructions are liable to change as development progresses. If some of the components do not work as expected, please add your question to the MADDE talk thread and follow up the discussion.

tablets-dev.nokia.com is down, see MADDE#Installation for alternatives.


Contents

[edit] Introduction

This guide explains how to take a simple Qt application and compile it so that it deploys to the N900 with an Icon. It is supposed to be step by step guide on how to take a (simple) Qt app and package and deploy it with an Icon using MADDE.

[edit] Prerequisites

The project I have is simple, 1 window called mainwindow.

Note: As a convention I like to keep all my code together, so I have created any extra files in the "src" folder.

[edit] Steps

  1. Create simple project through MADDE. mad pscreate -t qt_simple projectname
  2. Edit and test with Qt Creator (or whatever your favorite tool is).
  3. Once ready to deploy create a clean empty top level folder <projectname>-0.x where x is your revision number, for example C:\Madde\0.5\home\shep\wwcalc-0.1 in the OS Note: the following 3 steps apply each time you go to build.
    1. ensure there is no debian folder at the same level as src
    2. ensure there is no folder structure called <projectname>-0.x-orig left over from a failed compile
    3. remove old compiles from the Madde\home\user, for example C:\Madde\0.5\home\Shep folder.
  4. Copy the src folder from the tested Qt project into the <projectname-0.x folder
  5. Create (or obtain) an application Icon. This should be a 64x64 PNG. Call it <projectname>.png and place it in the src folder.
  6. Again inside the src folder create a new file called <projectname>.desktop Code: 
    [Desktop Entry]
Encoding=UTF-8
Version=0.x
Type=Application
Name=<Long Descriptive Project Name>
Exec=/usr/bin/<projectname>
Icon=<projectname>
X-HildonDesk-ShowInToolbar=true
X-Osso-Type=application/x-executable
  7. Inside the src folder added a file called src.pro. Getting this right is the key to getting the Makefile correct and hence the install working. At the end of this file there is a section called INSTALLS += ... for every file you want installed in a location you need an entry here. In the example here we install the target, icon and desktop files. Code: 
    TARGET = wwcalc
TEMPLATE = app
SOURCES += qtmain.cpp \
    mainwindow.cpp 
HEADERS += mainwindow.h 
FORMS += mainwindow.ui 

unix {
  PREFIX = /usr
  BINDIR = $$PREFIX/bin
  DATADIR =$$PREFIX/share

  DEFINES += DATADIR=\"$$DATADIR\" PKGDATADIR=\"$$PKGDATADIR\"

  #MAKE INSTALL

  INSTALLS += target desktop icon64 

  target.path =$$BINDIR

  desktop.path = $$DATADIR/applications/hildon
  desktop.files += wwcalc.desktop

  icon64.path = $$DATADIR/icons/hicolor/64x64/apps
  icon64.files += wwcalc.png
}
  8. Up one level and inside the top level folder (that is, C:\Madde\0.5\home\<YOU!>\<projectname>-0.x ) create a file called <projectname>.pro with the following exact contents. Code: 
    TEMPLATE = subdirs
SUBDIRS  = src
  9. In Madde make sure the runtime is up and connectible and then execute. Code: 
    mad dh_make --createorig --single -e foo.bar@gmail.com -c gpl

    Several people have commented that mad qmake is not required, but I find there are times that it is, ignore this next line if you wish 

    mad qmake
mad dpkg-buildpackage
mad remote -r org.maemo.<projectname> send ../<projectname>_0.x-1_armel.deb
mad remote -r org.maemo.<projectname> install <projectname>_0.x-1_armel.deb
  10. Uninstalling - from an X_Terminal. Code: 
    sudo gainroot
dpkg -r <projectname>

[edit] Additional information

Retrieved from "http://wiki.maemo.org/MADDE/Packaging"