Nitdroid easy install on EMMC

Latest revision as of 12:28, 12 October 2016

Some instructions here may cause serious problems. When unsure, see General precautions
Backing up your data is recommended. In case of trouble you might need to re-flash your device.

Under heavy construction

NITDroid Port

1 Installing NITDroid
- 1.1 Method 1
2 Uninstalling NITDroid
- 2.1 If Installed By Method 1
- 2.2 If Installed By Method 2

[edit] Installing NITDroid

This tutorial is specifically designed to install Nitdroid on the internal memory of the N900 (EMMC) and does not apply to installation on an external micro SD card. The main purpose of installing Nitdroid on the internal memory is that in most cases you will see an increased performance.

There are two ways of installing NITDroid:

1. Copy NITDroid's rootfs to /and in /home: Easier - Faster

2. Creating a custom 2GB partition on your eMMC: Cleaner - Requires a brain Bold text

[edit] Method 1

NOTE: It is highly recomended that you flash the modded 8GB 20GB eMMC image. Nitdroid won't recognize/use/install anything if you have low memory in mmcblk0p2. NOTE on Note: there are other - probably better - ways to increase your /home partition's size.

1. Download the NITDroid Autoinstaller to ./MyDocs i.e. root directory of N900 and install it:

http://talk.maemo.org/attachment.php?attachmentid=22707&d=1316433657

[edit] Uninstalling NITDroid

[edit] If Installed By Method 1

Tap on the NITDroid-Uninstaller on your menu.

[edit] If Installed By Method 2

Open X Terminal and type the following commands:

root
mount -o noatime,rw /dev/mmcblk0p5
rm -rf /and/.

Then uninstall multiboot by anyway you prefer.

Retrieved from "http://wiki.maemo.org/Nitdroid_easy_install_on_EMMC"

Categories: Power users | N900

This page was last modified on 12 October 2016, at 12:28.
This page has been accessed 356,789 times.

@@ Line 16: / Line 16: @@
 . Creating a custom 2GB partition on your eMMC: Cleaner - Requires a brain
+'''Bold text'''
@@ Line 26: / Line 26: @@
 http://talk.maemo.org/attachment.php?attachmentid=22707&d=1316433657
-. Run the NITDroid installer app from your programs list.
-(If installation fails, try writing "apt-get install bzip2" in XTerminal and  uninstall and install again)
-[[Media:Example.ogg]]
-===Method 2===
-As said before, this requires a brain and a bit of concentration, follow step-by-step, and use some logic.
-'''NOTE: This will wipe all of your data, please BACKUP necessary data first.'''
-# Download the archive + the kernel + Fdisk to /MyDocs i.e. root dir. of N900:
-#* Image: http://downloads.nitdroid.com/e-yes/
-#* Kernel: http://downloads.nitdroid.com/e-yes/nitdroid-kernel-2.6.28-07_rc4_armel.deb
-#* Fdisk: http://ftp.de.debian.org/debian-archive/debian/pool/main/u/util-linux/util-linux_2.13.1.1-1_armel.deb
-# Enable all repositories from App manager ([[Extras-testing]], [[Extras-devel]], [[Extras]] and the default [[User:Jebba/Repositories#Nokia_Official|Nokia repos]])
-----
-<ol>
-<li>
-Install Fdisk by executing the following commands in Xterminal:
-<pre>
-root
-mkdir -p /home/user/util-linux /home/user/bin
-cp /home/user/MyDocs/util-linux_2.13.1.1-1_armel.deb /home/user/util-linux
-cd /home/user/util-linux
-dpkg-deb -x util-linux_2.13.1.1-1_armel.deb root
-cp root/sbin/fdisk /home/user/bin/
-cd ..
-rm -rf util-linux
-</pre>
-</li>
-<li>
-Unmount designated partition (./MyDocs):
-<pre>
-umount /home/user/MyDocs
-</pre>
-</li>
-<li>
-Launch Fdisk:
-<pre>
-/home/user/bin/fdisk /dev/mmcblk0
-</pre>
-</li>
-<li>
-Print your current partition table:
-<pre>
-p
-</pre>
-This table should show up:
-<pre>
-       Device Boot      Start         End      Blocks   Id  System
-/dev/mmcblk0p1               2      884865    28315648    c  W95 FAT32 (LBA)
-/dev/mmcblk0p2          884866      950401     2097152   83  Linux
-/dev/mmcblk0p3          950402      974977      786432   82  Linux swap / Solaris
-</pre>
-</li>
-<li>
-Delete partition 1 (./MyDocs):
-<pre>
-d
-</pre>
-<li>
-Create new re-sized primary partition:
-<pre>
-n
-p
-First cylinder: 2
-Last cylinder: 800000
-</pre>
-<li>
-Create new extended partition:
-<pre>
-n
-e
-First cylinder: 800001
-Last cylinder: 884865
-n
-First cylinder: 800001
-Last cylinder: 884865
-t
-t
-</pre>
-</li>
-<li>
-Point of no return - writing the table and syncing:
-<pre>
-w
-reboot
-</pre>
-</li>
-<li>
-Ignore any errors. After the reboot, return ./MyDocs back and format the new NITDroid partition by executing these:
-<pre>
-root
-/home/user/bin/fdisk /dev/mmcblk0
-t
-c
-w
-umount /dev/mmcblk0p1
-mkfs.vfat -F 32 /dev/mmcblk0p1
-mke2fs -L NITDroid -j -m0 /dev/mmcblk0p5
-reboot
-</pre>
-If your device still has a flash memory on it, then lift your shoulders up as the hard part is gone!
-<li>
-Install Nitdroid on the new partition:
-<pre>
-apt-get update
-apt-get install nitdroid-installer
-mkdir -p /and
-mount -o noatime,rw /dev/mmcblk0p5 /and
-cd /home/user/MyDocs
-rm -rf /and/*
-bzcat Nitdroidarchivename.tar.bz2 | tar xvC /and
-dpkg -i nitdroid-kernel-2.6.28-07_rc4_armel.deb
-reboot
-</pre>
-<li>
-==== Trouble Booting NITDroid ====
-If you cannot boot into NITDroid because of an error like this one:
-"Root Filesystem mmcblk1p5 missing"
-Guru Meditation 0000025...etc
-Try following:
-Edit /etc/multiboot.d/11-NITDroid-mmcblk0p5-*.item with an editor of your choice (eg. nano).
-<pre>
-apt-get install nano
-nano /etc/multiboot.d/11-NITDroid-mmcblk0p5-2.6.28.NIT.07.item  #check filename!
-</pre>
-And change the line ITEM_DEVICE={INT_CARD}p5 to:
-<pre>
-ITEM_DEVICE=mmcblk0p5
-</pre>
-reboot with opened keyboard and try to start NITDroid.
-</li></ol>
 == Uninstalling NITDroid ==

Personal tools

Navigation

Views